Page 305 of 3115

BE0S5-05
I06114
I07503
OPEN
I06238
CLOSE
I07504
OPEN
- BODY ELECTRICALPOWER REAR QUARTER WINDOW SYSTEM
BE-85
2458 Author: Date:
2004 LAND CRUISER (RM1071U)
INSPECTION
1. INSPECT POWER QUARTER WINDOW SWITCH CON-
TINUITY
Switch positionTester connectionSpecified condition
CLOSE3 - 6
4 - 5Continuity
OFF-Continuity
OPEN3 - 4
5 - 6Continuity
Illumination Circuit1 - 2Continuity
If continuity is not as specified, replace the switch.
2. Left side:
INSPECT POWER VENT WINDOW MOTOR OPERA-
TION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (-) lead to terminal 2, and check that
the window link moves to OPEN position.
(b) Remove the polarity and check that the window link
moves to CLOSE position.
If operation is not as specified, replace the window motor.
3. Right side:
INSPECT POWER VENT WINDOW MOTOR OPERA-
TION
(a) Connect the positive (+) lead from the battery to terminal
2 and the negative (-) lead to terminal 1, and check that
the window link moves to OPEN position.
Page 306 of 3115
I07505
CLOSE BE-86
- BODY ELECTRICALPOWER REAR QUARTER WINDOW SYSTEM
2459 Author: Date:
2004 LAND CRUISER (RM1071U)
(b) Remove the polarity and check that the window link
moves to CLOSE position.
Page 307 of 3115
BE0S4-06
I24747
Ignition Switch
Cowl Side J/B LH
GAUGE1 FuseRear Quarter Window Switch
Rear Quarter Window Motor
BE-84
- BODY ELECTRICALPOWER REAR QUARTER WINDOW SYSTEM
2457 Author: Date:
2004 LAND CRUISER (RM1071U)
POWER REAR QUARTER WINDOW SYSTEM
LOCATION
Page 308 of 3115

BE0S5-05
I06114
I07503
OPEN
I06238
CLOSE
I07504
OPEN
- BODY ELECTRICALPOWER REAR QUARTER WINDOW SYSTEM
BE-85
2458 Author: Date:
2004 LAND CRUISER (RM1071U)
INSPECTION
1. INSPECT POWER QUARTER WINDOW SWITCH CON-
TINUITY
Switch positionTester connectionSpecified condition
CLOSE3 - 6
4 - 5Continuity
OFF-Continuity
OPEN3 - 4
5 - 6Continuity
Illumination Circuit1 - 2Continuity
If continuity is not as specified, replace the switch.
2. Left side:
INSPECT POWER VENT WINDOW MOTOR OPERA-
TION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (-) lead to terminal 2, and check that
the window link moves to OPEN position.
(b) Remove the polarity and check that the window link
moves to CLOSE position.
If operation is not as specified, replace the window motor.
3. Right side:
INSPECT POWER VENT WINDOW MOTOR OPERA-
TION
(a) Connect the positive (+) lead from the battery to terminal
2 and the negative (-) lead to terminal 1, and check that
the window link moves to OPEN position.
Page 309 of 3115
I07505
CLOSE BE-86
- BODY ELECTRICALPOWER REAR QUARTER WINDOW SYSTEM
2459 Author: Date:
2004 LAND CRUISER (RM1071U)
(b) Remove the polarity and check that the window link
moves to CLOSE position.
Page 310 of 3115
BE0S4-06
I24747
Ignition Switch
Cowl Side J/B LH
GAUGE1 FuseRear Quarter Window Switch
Rear Quarter Window Motor
BE-84
- BODY ELECTRICALPOWER REAR QUARTER WINDOW SYSTEM
2457 Author: Date:
2004 LAND CRUISER (RM1071U)
POWER REAR QUARTER WINDOW SYSTEM
LOCATION
Page 311 of 3115

BE0S7-02
I01913
Lifter
Up
Down Reclining
1
Front Vertical
Up
Down
FrontBack
2 3 4 5
6 7 8 9 10 11 12
Forward
Rear
I07173
Wire Harness Side: BE-1 10
- BODY ELECTRICALPOWER SEAT CONTROL SYSTEM
2483 Author: Date:
2004 LAND CRUISER (RM1071U)
INSPECTION
1. INSPECT DRIVER'S POWER SEAT SWITCH CONTI-
NUITY
Slide Switch:
Switch positionTester connectionSpecified condition
FRONT 4 - 7 8 - 11Continuity
OFF4 - 7 - 8Continuity
BACK 4 - 11 7 - 8Continuity
Front vertical switch:
Switch positionTester connectionSpecified condition
UP 7 - 9 10 - 11Continuity
OFF7 - 9 - 10Continuity
DOWN 7 - 10 9 - 11Continuity
Lifter switch:
Switch positionTester connectionSpecified condition
UP 2 - 11 3 - 7Continuity
OFF2 - 3 - 7Continuity
DOWN 2 - 7 3 - 11Continuity
Reclining switch:
Switch positionTester connectionSpecified condition
FORWARD 1 - 11 5 - 7Continuity
OFF1 - 5 - 7Continuity
REAR 1 - 7 5 - 11Continuity
If continuity is not as specified, replace the switch.
2. INSPECT DRIVER'S POWER SEAT SWITCH CIRCUIT
(a) Disconnect the switch connector and connect the seat
wire harness to the floor wire harness.
(b) Inspect the connector on the wire harness side.
Tester connectionConditionSpecified condition
7 - GroundConstantContinuity
11 - GroundConstantBattery positive voltage
If circuit is not as specified, inspect the circuits connected to oth-
er parts.
Page 312 of 3115

I01913
Lifter
Up
Down Reclining
1
Front Vertical
Up
Down
FrontBack
2 3 4 5
6 7 8 9 10 11 12
Forward
Rear
I07173
Wire Harness Side:
- BODY ELECTRICALPOWER SEAT CONTROL SYSTEM
BE-1 11
2484 Author: Date:
2004 LAND CRUISER (RM1071U)
3. INSPECT PASSENGER'S POWER SEAT SWITCH
CONTINUITY
Slide switch:
Switch positionTester connectionSpecified condition
FRONT 4 - 7 8 - 11Continuity
OFF4 - 7 - 8Continuity
BACK 4 - 11 7 - 8Continuity
Front vertical switch:
Switch positionTester connectionSpecified condition
UP 7 - 10 9 - 11Continuity
OFF7 - 9 - 10Continuity
DOWN 6 - 9 10- 11Continuity
Lifter switch:
Switch positionTester connectionSpecified condition
UP 2 - 7 3 - 11Continuity
OFF2 - 3 - 7Continuity
DOWN 2 - 11 3 - 7Continuity
Reclining switch:
Switch positionTester connectionSpecified condition
FORWARD 1 - 11 5 - 7Continuity
OFF1 - 5 - 7Continuity
REAR 1 - 7 5 - 11Continuity
If continuity is not as specified, replace the switch.
4. INSPECT PASSENGER'S POWER SEAT SWITCH CIR-
CUIT
(a) Disconnect the switch connector and connect the seat
wire harness to the floor wire harness.
(b) Inspect the connector on the wire harness side.
Tester connectionConditionSpecified condition
7 - GroundConstantContinuity
11 - GroundConstantBattery positive voltage
If circuit is not as specified, inspect the circuits connected to oth-
er parts.