Page 2449 of 3115

LU08O-02
B04490Engine Under Cover No.3
B04609
B04481
Service Hole Cover
LU-2
- LUBRICATIONOIL AND FILTER
1783 Author: Date:
2004 LAND CRUISER (RM1071U)
REPLACEMENT
CAUTION:
Prolonged and repeated contact with mineral oil will
result in the removal of natural fats from the skin,
leading to dryness, irritation and dermatitis. In addi-
tion, used engine oil contains potentially harmful
contaminants which may cause skin cancer.
Care should be taken, therefore, when changing en-
gine oil to minimize the frequency and length of time
your skin is exposed to used engine oil. Protective
clothing and gloves that cannot be penetrated by oil
should be worn. The skin should be thoroughly
washed with soap and water, or use water-less hand
cleaner, to remove any used engine oil. Do not use
gasoline, thinners, or solvents.
In order to preserve the environment, used oil and
used oil filters must be disposed of only at desig-
nated disposal sites.
1. DRAIN ENGINE OIL
(a) Remove the 2 nuts and engine under cover No.3.
(b) Remove the oil filler cap.
(c) Remove the oil drain plug, and drain the oil into a contain-
er.
2. REPLACE OIL FILTER
(a) Remove the 2 bolts and service hole cover.
Page 2450 of 3115

B04482
SST
B04483
B04484
SST
3/4 Turn
- LUBRICATIONOIL AND FILTER
LU-3
1784 Author: Date:
2004 LAND CRUISER (RM1071U)
(b) Using SST, remove the oil filter.
SST 09228-07501
(c) Clean the oil filter contact surface on the oil filter mount-
ing.
(d) Lubricate the filter rubber gasket with clean engine oil.
(e) Tighten the oil filter by hand until the rubber gasket con-
tacts the seat of the filter mounting.
(f) Using SST, give it an additional 3/4 turn to seat the filter.
SST 09228-07501
3. REFILL WITH ENGINE OIL
(a) Clean and install the oil drain plug with a new gasket.
Torque: 39 N´m (400 kgf´cm, 29 ft´lbf)
(b) Fill with new engine oil.
Capacity:
Drain and refill:
w/ Oil filter change: 6.8 liters (7.2 US qts, 6.0 Imp. qts)
w/o Oil filter change: 6.4 liters (6.8 US qts, 5.6 Imp. qts)
Dry fill: 8.0 liters (8.5 US qts, 7.0 Imp. qts)
(c) Reinstall the oil filler cap.
4. START ENGINE AND CHECK FOR ENGINE OIL
LEAKS
5. RECHECK ENGINE OIL LEVEL
6. REINSTALL ENGINE UNDER COVER NO.3 AND SER-
VICE HOLE COVER
Page 2451 of 3115
LU08W-08
B04473
Oil Cooler Hose
O-Ring
Oil Cooler
Plate Washer
Union Bolt
Oil Filter
N´m (kgf´cm, ft´lbf): Specified torque
Non-reusable part
68.6 (700, 51)
- LUBRICATIONOIL COOLER
LU-19
1800 Author: Date:
2004 LAND CRUISER (RM1071U)
OIL COOLER
COMPONENTS
Page 2452 of 3115
LU08Y-06
B04610
- LUBRICATIONOIL COOLER
LU-21
1802 Author: Date:
2004 LAND CRUISER (RM1071U)
INSPECTION
INSPECT OIL COOLER
Check the oil cooler for damage or clogging.
If necessary, replace the oil cooler.
Page 2453 of 3115
LU08Z-08
B04611
New O-Ring
B04612
LU-22
- LUBRICATIONOIL COOLER
1803 Author: Date:
2004 LAND CRUISER (RM1071U)
INSTALLATION
1. INSTALL OIL COOLER
(a) Clean the oil cooler contact surface on the cooler mount-
ing.
(b) Install a new O-ring to the oil cooler.
(c) Apply a light coat of engine oil on the threads and under
the head of the union bolt.
(d) Install the plate washer and union bolt.
Torque: 68.6 N´m (700 kgf´cm, 51 ft´lbf)
(e) Connect the 2 oil cooler hoses to the oil cooler.
2. INSTALL OIL FILTER (See page LU-2)
3. FILL WITH ENGINE COOLANT
4. START ENGINE AND CHECK FOR ENGINE OIL
LEAKS
5. CHECK ENGINE OIL LEVEL
Page 2454 of 3115
LU08X-06
B04612
LU-20
- LUBRICATIONOIL COOLER
1801 Author: Date:
2004 LAND CRUISER (RM1071U)
REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE OIL FILTER (See page LU-2)
3. REMOVE OIL COOLER
(a) Disconnect the 2 oil cooler hoses from the oil cooler.
(b) Remove the union bolt, plate washer and the oil cooler.
(c) Remove the O-ring from the oil cooler.
Page 2455 of 3115
LU08P-07
B04470
B04791
RH No.3 Timing Belt Cover
LH No.3 Timing Belt CoverNo.2 Timing Belt Cover
Camshaft Position
Sensor Connector
Engine Wire
Drive Belt Idler PulleyTiming Belt
Fan Bracket
N´m (kgf´cm, ft´lbf) : Specified torqueOil Cooler Pipe
Timing Belt Tensioner Dust Boot
Cover Plate
39 (400,29)
245 (2,500, 181)
32 (330, 24)
16 (160, 12)
7.5 (80, 66 in.´lbf)
16 (160, 12)
Water Bypass
Hose
LU-4
- LUBRICATIONOIL PUMP
1785 Author: Date:
2004 LAND CRUISER (RM1071U)
OIL PUMP
COMPONENTS
Page 2456 of 3115
B04472
GeneratorDrive Belt Tensioner
No.1 Timing Belt Cover
Crankshaft Pulley
Timing Belt
Timing Belt Guide
(Crankshaft Angle Sensor Plate)No.1 Idler Pulley
Crankshaft Timing PulleyPlate Washer
No.2 Idler Pulley
Timing Belt Cover SpacerGasket
Precoated part
N´m (kgf´cm, ft´lbf) : Specified torque
39 (400, 29)
34.5 (350, 25)
34.5 (350, 25)
- LUBRICATIONOIL PUMP
LU-5
1786 Author: Date:
2004 LAND CRUISER (RM1071U)