B04999
SF0Y2-05
B04935Clamp
Clamp
Clamp
SF-22
- SFIINJECTOR
1721 Author: Date:
2004 LAND CRUISER (RM1071U)
REMOVAL
1. REMOVE V-BANK COVER
2. REMOVE INTAKE AIR CONNECTOR
3. REMOVE FUEL PRESSURE PULSATION DAMPER
Remove the pulsation damper, the upper gasket, the fuel main
hose and the lower gasket.
CAUTION:
Put a shop rag under the delivery pipe.
Slowly loosen the pulsation damper.
4. DISCONNECT ENGINE WIRE PROTECTOR FROM UP-
PER INTAKE MANIFOLD
(a) Disconnect the PCV hose from the PCV valve.
(b) Disconnect the VSV for EVAP from the upper intake man-
ifold.
(c) Remove the No.1 V-bank cover bracket from the upper
intake manifold.
(d) Remove the No.2 V-bank cover bracket from the upper
intake manifold.
(e) Remove the No.3 V-bank cover bracket from the upper
intake manifold.
(f) Remove the No.4 V-bank cover bracket from the upper
intake manifold.
(g) Remove the 2 bolts, and disconnect the engine wire pro-
tector from the upper intake manifold.
(h) Disconnect the engine wire clamp from the No.1 engine
hanger.
5. DISCONNECT ENGINE WIRE FROM RH DELIVERY
PIPE
Disconnect the 2 wire clamps on the engine wire from the brack-
ets on the delivery pipe.
6. REMOVE DELIVERY PIPES AND INJECTORS
NOTICE:
Be careful not to drop the injectors when removing
the delivery pipes.
Since the O-ring may be stuck to the injector, do not
put a side load on it at the removal.
