1999 TOYOTA CAMRY Service Repair Manual

Page 377 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±71
5. INSTALL COUNTER DRIVE GEAR AND FRONT BEAR-
ING
(a) Install the gear onto the shaft, and mesh the ring gear with
the planetary pinions.
(b) Place the fron

Page 378 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±72
HINT: Turn the counter drive gear right and left several
times before measuring the preload.
(c) Lock the adjusting nut with one locking washer tab. Bend
th

Page 379 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±73
(e) Install the snap ring.
12. CHECK OPERATION OF O/D ONE±WAY CLUTCH
(a) Install the overdrive direct clutch into the one±way clutch.
(b) Hold the overdri

Page 380 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±74
2. REMOVE OIL SEAL RINGS
OVERDRIVE CASE ASSEMBLY
1. INSTALL OIL SEAL RINGS ON OVERDRIVE CASE
Install the 2 oil seal rings to the overdrive case groove,
then

Page 381 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±75
OVERDRIVE BRAKE ASSEMBLY
1. INSTALL PISTON INTO DRUM
(a) Install new O±rings to the piston.
Coat the new O±rings with ATF.
(b) Press the piston into the d

Page 382 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±76
4. INSTALL SNAP RING INTO CASE
Be sure the end gap of the snap ring is not aligned with
one of cutouts.
5. INSTALL OVERDRIVE PLANETARY GEAR ONTO OV-
ERDRIVE

Page 383 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEVALVE BODY ±
AX±77
VALVE BODY
COMPONENTS
VALVE BODY DISASSEMBLY
NOTICE: When disassembling the valve body, be careful
not to damage or deform the plate which overhangs the
valve b

Page 384 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEVALVE BODY ±
AX±78
2. REMOVE LOCK PLATE
3. REMOVE B
0 ACCUMULATOR ASSEMBLY
(a) Remove the 3 bolts.
(b) Remove the B
0 accumulator assembly.
4. DISASSEMBLE B
0 ACCUMULATOR ASSEMBLY