1999 TOYOTA CAMRY Service Repair Manual

Page 545 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEDIFFERENTIAL ASSEMBLY ±
AX±96
DIFFERENTIAL CASE DISASSEMBLY
1. REMOVE SIDE BEARING
Using SST, remove the 2 side bearings.
SST 09608±16011, 09550±40010
2. REMOVE RING GEAR
(a) Pl

Page 546 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEDIFFERENTIAL ASSEMBLY ±
AX±97
4. DISASSEMBLE DIFFERENTIAL CASE
(a) Drive out the pinion shaft lock pin from the side on which
the ring gear is installed.
(b) Remove the pinion sha

Page 547 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEDIFFERENTIAL ASSEMBLY ±
AX±98
(d) Check the side gear backlash.
Measure the side gear backlash while holding one pinion
gear toward the case.
Standard backlash:
0.05±0.20 mm (0.0

Page 548 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEDIFFERENTIAL ASSEMBLY ±
AX±99
3. INSTALL SIDE BEARING
(a) Install the speedometer drive gear onto the differential
case.
(b) Using SST and a press, press in the RH side bearing on

Page 549 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLECOMPONENT PARTS INSTALLATION ±
AX±100
COMPONENT PARTS INSTALLATION
Disassembly, inspection and assembly of each component group have been indicated in the preceding
chapter. Befor

Page 550 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLECOMPONENT PARTS INSTALLATION ±
AX±101
MarkThrust Bearing Outside Diameter
mm (in.)Thrust Bearing Inside Diameter
mm (in.)
ASee page AX±11827.7 (1.091)
B47.6 (1.874)31.4 (1.236)
C

Page 551 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLECOMPONENT PARTS INSTALLATION ±
AX±102
DIFFERENTIAL AND DRIVE PINION
INSTALLATION
1. INSTALL DRIVE PINION INTO TRANSAXLE CASE
(a) Using SST, install the bearing to the drive pinion

Page 552 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLECOMPONENT PARTS INSTALLATION ±
AX±103
2. PLACE OIL SLINGER AND NEW SPACER
HINT: Install the spacer with the small end downward.
3. INSTALL OUTER RACE TO TRANSAXLE CASE
Using SST,