1999 TOYOTA CAMRY Service Repair Manual

fuel consumptionmaintenance resetheightad bluecoolant capacityUSB port
Popular search:
ad bluecoolant temp sensorstrunk releasetowingCD playeropen gas tankstop start
Previous
Next
Load previous 8 pages

Page 257 of 4592

TOYOTA CAMRY 1999 Service Repair Manual AUTOMATIC TRANSAXLELOWER VALVE BODY ± AX±87 @@ @@ @: [c D] 1±2 Shift Valve Spring (None)29.27 / 9.70 (1.1524 / 0.3819)10.5 @@ @@ @: [c E] 2±3 Shift Valve Spring (None)29.27 / 9.70 (1.1524 / 0.3819

Page 258 of 4592

TOYOTA CAMRY 1999 Service Repair Manual AUTOMATIC TRANSAXLELOWER VALVE BODY ± AX±88 RETAINER, STRAINER AND CHECK BALLS LOCATION RetainerHeight / Width / Thickness mm (in.) @@@@@: [c I]Primary Regulator Valve9.2 / 5.0 / 3.2 (0.362 / 0.197

Page 259 of 4592

TOYOTA CAMRY 1999 Service Repair Manual AUTOMATIC TRANSAXLEDIFFERENTIAL ASSEMBLY ± AX±89 DIFFERENTIAL ASSEMBLY COMPONENTS AX0GF±02

Page 260 of 4592

TOYOTA CAMRY 1999 Service Repair Manual AUTOMATIC TRANSAXLEDIFFERENTIAL ASSEMBLY ± AX±90 DIFFERENTIAL CASE DISASSEMBLY 1. REMOVE RING GEAR (a) Loosen the staked part of the lock plate. (b) Remove the 8 bolts and locking plates. (c) Using

Page 261 of 4592

TOYOTA CAMRY 1999 Service Repair Manual AUTOMATIC TRANSAXLEDIFFERENTIAL ASSEMBLY ± AX±91 (b) Remove the pinion shaft from the case. (c) Remove the 2 pinions and 2 side gears with the 4 thrust washers. 5. REMOVE LH OIL SEAL Using a hammer

Page 262 of 4592

TOYOTA CAMRY 1999 Service Repair Manual AUTOMATIC TRANSAXLEDIFFERENTIAL ASSEMBLY ± AX±92 2. INSTALL BEARING OUTER RACE TO LH SIDE BEAR- ING RETAINER (a) Place the shim onto the retainer. (b) Using SST, press a new outer race into the reta

Page 263 of 4592

TOYOTA CAMRY 1999 Service Repair Manual AUTOMATIC TRANSAXLEDIFFERENTIAL ASSEMBLY ± AX±93 (d) Check the side gear backlash. Measure the side gear backlash while holding one pinion gear toward the case. Standard backlash: 0.05 ± 0.20 mm (0

Page 264 of 4592

TOYOTA CAMRY 1999 Service Repair Manual AUTOMATIC TRANSAXLEDIFFERENTIAL ASSEMBLY ± AX±94 (c) Using SST and a press, press in the LH side bearing onto the differential case. SST 09710±28020 (09710±08040) 6. INSTALL RING GEAR (a) Clean t
Load next 8 pages
Page:   < prev 1-10 ... 225-232 233-240 241-248 249-256 257-264 265-272 273-280 281-288 289-296 ... 4592 next >
headrestrecommended oilground clearancespare tire locationgas typemanual radio set
Popular search:
heighthood openclocktechnical datawiper and washerstart stop buttonEng specifications