1999 TOYOTA CAMRY Service Repair Manual

Page 3585 of 4592

TOYOTA CAMRY 1999  Service Repair Manual SA07K±01
W02121
SST
W03193
SST
W03316
SST
W03145
SST
SST
W03194
SST
(3.957 in.) 100.5 mm
± SUSPENSION AND AXLEFRONT DRIVE SHAFT (1MZ±FE)
SA±29
1980 Author: Date:
REASSEMBLY
1. INSTALL NO.2 DUST

Page 3586 of 4592

TOYOTA CAMRY 1999  Service Repair Manual W03195
Inboard Joint BootOutboard Joint Boot
Vinyl Tape
W03196
R14973
SA±30
± SUSPENSION AND AXLEFRONT DRIVE SHAFT (1MZ±FE)
1981 Author: Date:
4. TEMPORARILY INSTALL OUTBOARD AND INBOARD
JOINT BO

Page 3587 of 4592

TOYOTA CAMRY 1999  Service Repair Manual R10353
SST
F02023
Clearance
SST
ABC
± SUSPENSION AND AXLEFRONT DRIVE SHAFT (1MZ±FE)
SA±31
1982 Author: Date:
(e) Secure the preplaced 3 clamps onto the boots.
(f) Place SST onto the clamp.
SST 09

Page 3588 of 4592

TOYOTA CAMRY 1999  Service Repair Manual SA07L±01
SA±32
± SUSPENSION AND AXLEFRONT DRIVE SHAFT (1MZ±FE)
1983 Author: Date:
INSTALLATION
Installation is in the reverse order of removal (See page SA±26).
AFTER INSTALLATION, CHECK ABS SP

Page 3589 of 4592

TOYOTA CAMRY 1999  Service Repair Manual SA07M±05
F06530
Suspension Support
Spring Bumper
Link Stabilizer Bar
Shock
Absorber
ABS Speed Sensor
Wire Harness ClampFront Drive Shaft with Coil SpringUpper Seat Bearing
Lower
Insulator
Lower Suspe

Page 3590 of 4592

TOYOTA CAMRY 1999  Service Repair Manual SA07N±01
Z19346
To Outside SA±34
± SUSPENSION AND AXLEFRONT SHOCK ABSORBER
1985 Author: Date:
REMOVAL
1. REMOVE FRONT WHEEL
Torque: 103 N´m (1,050 kgf´cm, 76 ft´lbf)
2. REMOVE FLEXIBLE HOSE AN

Page 3591 of 4592

TOYOTA CAMRY 1999  Service Repair Manual SA07O±01
W03198
SST
SST
W03199
SST
± SUSPENSION AND AXLEFRONT SHOCK ABSORBER
SA±35
1986 Author: Date:
DISASSEMBLY
REMOVE COIL SPRING
(a) Install 2 nuts and a bolt to the bracket at the lower port

Page 3592 of 4592

TOYOTA CAMRY 1999  Service Repair Manual SA07P±01
W03646
SA±36
± SUSPENSION AND AXLEFRONT SHOCK ABSORBER
1987 Author: Date:
INSPECTION
INSPECT SHOCK ABSORBER
Compress and extend the shock absorber rod and check that
there is no abnormal