1999 TOYOTA CAMRY Service Repair Manual

Page 345 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEOIL PUMP ±
AX±39
3. CHECK SIDE CLEARANCE OF BOTH GEARS
Using a steel straightedge and feeler gauge, measure the
side clearance of both gears.
Standard side clearance:
0.002±0.005

Page 346 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEOIL PUMP ±
AX±40
2. INSTALL DRIVEN GEAR AND DRIVE GEAR
Make sure the top of the gears are facing upward.
3. INSTALL STATOR SHAFT TO PUMP BODY
(a) Align the stator shaft with each

Page 347 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEDIRECT CLUTCH ±
AX±41
DIRECT CLUTCH
COMPONENTS
DIRECT CLUTCH DISASSEMBLY
1. CHECK PISTON STROKE OF DIRECT CLUTCH
(a) Install the direct clutch on the oil pump.
(b) Install a dial

Page 348 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEDIRECT CLUTCH ±
AX±42
2. REMOVE SNAP RING FROM CLUTCH DRUM
3. REMOVE FLANGE, DISCS AND PLATES
4. REMOVE PISTON RETURN SPRING
(a) Place SST on the spring retainer and compress the

Page 349 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEDIRECT CLUTCH ±
AX±43
DIRECT CLUTCH INSPECTION
1. INSPECT CLUTCH PISTON
(a) Check that the check ball is free by shaking the piston.
(b) Check that the valve does not leak by appl

Page 350 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEDIRECT CLUTCH ±
AX±44
(b) Place SST on the spring retainer, and compress the re-
turn spring with a press.
SST 09350±32014 (09351±32070)
(c) Install the snap ring using snap rin

Page 351 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEFORWARD CLUTCH ±
AX±45
FORWARD CLUTCH
COMPONENTS
FORWARD CLUTCH DISASSEMBLY
1. CHECK PISTON STROKE OF FORWARD CLUTCH
Install a dial indicator and measuring terminal (SST) to-
geth

Page 352 of 4592

TOYOTA CAMRY 1999  Service Repair Manual AUTOMATIC TRANSAXLEFORWARD CLUTCH ±
AX±46
2. REMOVE SNAP RING FROM CLUTCH DRUM
3. REMOVE FLANGE, DISCS AND PLATES
4. REMOVE RETURN SPRING
(a) Place SST on the spring retainer and compress the
spring