1999 TOYOTA CAMRY Service Repair Manual

Page 3761 of 4592

TOYOTA CAMRY 1999  Service Repair Manual BR002±94
BRAKE VIBRATION AND/OR PULSATIONPage 6 of 6
C. Phase Match Rotor To Hub
± If rotor runout is at the maximum value or greater, (refer to appropriate repair manual)
index the rotor one lug an

Page 3762 of 4592

TOYOTA CAMRY 1999  Service Repair Manual Toyota Supports ASE CertificationPage 1 of 1
BR004±99
Title:
REAR BRAKE DRUM NOISE
Models:
99 Camry ± NAP
Technical Service
BULLETIN
July 16, 1999
  
Rear Brake Drums are available to reduce rear b

Page 3763 of 4592

TOYOTA CAMRY 1999  Service Repair Manual Toyota Supports ASE CertificationPage 1 of 4
BR004±00
Title:
BRAKE PAD CLICKING NOISE
Models:
90 ± 00 All Models
Technical Service
BULLETIN
October 20, 2000
  
A clicking type noise may be noticed

Page 3764 of 4592

TOYOTA CAMRY 1999  Service Repair Manual BRAKE PAD CLICKING NOISE ± BR004±00 October 20, 2000
Page 2 of 4
There are two types of brake calipers: floating and fixed.  Check the type of brake caliper
installed on the vehicle by removing the

Page 3765 of 4592

TOYOTA CAMRY 1999  Service Repair Manual BRAKE PAD CLICKING NOISE ± BR004±00 October 20, 2000
Page 3 of 4
G. Apply a small amount of the 
disc brake caliper grease
(1±2 mm thick) to the caliper 
as indicated in the illustration.
H. Instal

Page 3766 of 4592

TOYOTA CAMRY 1999  Service Repair Manual BRAKE PAD CLICKING NOISE ± BR004±00 October 20, 2000
Page 4 of 4
D. Apply a small amount of the 
disc brake caliper grease 
(1±2 mm thick) to the areas
indicated in the illustration.
NOTE:
Do NOT a

Page 3767 of 4592

TOYOTA CAMRY 1999  Service Repair Manual Toyota Supports ASE CertificationPage 1 of 2
EG001±00
Title:
SINGLE CYLINDER MISFIRES
Models:
99 Avalon, Camry, Sienna & Solara (CA Spec.)
Technical Service
BULLETIN
January 14, 2000
  
NOTE:
The in

Page 3768 of 4592

TOYOTA CAMRY 1999  Service Repair Manual SINGLE CYLINDER MISFIRE ± EG001-00 January 14, 2000
Page 2 of 2
1. Remove all six fuel injectors for
verification of production information.
Affected injectors will be labeled with
a vendor part numb