1999 TOYOTA CAMRY height

AUTOMATIC TRANSAXLESERVICE SPECIFICATIONS ±
AX±14
Valve Body Spring
SpringFree length and Coil outer
diameter mm (in.)Total No. of coils and Color
Upper valve body
Throttle modulator valve21.7 (0.854)
9.5 (0.374)9.5
None
Accumulator control valve28.1 (0.105)
10.6 (0.417)13.0
Yellow
Low coast modulator valve21.6 (0.850)
7.9 (0.311)11.5
None
Down shift plug29.8 (1.172)
8.7 (0.344)13.5
Yellow
Throttle valve30.7 (1.209)
9.2 (0.362)9.5
None
Second coast modulator valve20.9 (0.824)
8.5 (0.336)10.0
Light Green
Cut±back valve21.8 (0.858)
6.0 (0.236)13.5
None
Lock±up relay valve26.6 (1.046)
10.2 (0.402)11.5
Green
Lower valve body
Pressure relief valve11.2 (0.441)
6.4 (0.252)7.5
None
1 ± 2 shift valve29.3 (1.152)
9.7 (0.382)10.5
None
2 ± 3 shift valve29.3 (1.152)
9.7 (0.382)10.5
None
3 ± 4 shift valve29.3 (1.152)
9.7 (0.382)10.5
None
Primary regulator valve66.7 (2.453)
18.6 (0.732)12.5
None
Secondary regulator valve43.6 (1.717)
10.9 (0.429)11.5
None
Lock±up signal valve30.0 (1.181)
8.2 (0.323)11.5
None
Cooler By±pass valve19.9 (0.784)
11.0 (0.433)8.5
None
Valve Body Retainer
ReteinerHeight
mm (in.)Width
mm (in.)Thickness
mm (in.)
Upper valve body
Throttle Modulator valve9.2 (0.362)5.0 (0.197)3.2 (0.126)
Accumulator control valve11.5 (0.453)5.0 (0.197)3.2 (0.126)
Cut±back valve9.2 (0.591)5.0 (0.197)3.2 (0.126)
Lock±up relay valve15.0 (0.591)5.0 (0.197)3.2 (0.126)
Second coast modulator valve15.0 (0.591)5.0 (0.197)3.2 (0.126)
Lower valve body
Primary regulator valve9.2 (0.362)5.0 (0.197)3.2 (0.126)

AUTOMATIC TRANSAXLEUPPER VALVE BODY ±
AX±84
RETAINERS, PINS, VIBRATING STOPPER AND CHECK BALLS LOCATION
RetainerHeight / Width / Thickness
mm (in.)
@@@@@: [c H]Throttle Modulator Valve9.2 / 5.0 / 3.2 (0.362 / 0.197 / 0.126)
@@@@@: [c I]Accumulator Control Valve11.5 / 5.0 / 3.2 (0.453 / 0.197 / 0.126)
@@@@@: [c J]Cut±back Valve9.2 / 5.0 / 3.2 (0.362 / 0.197 / 0.126)
@@@@@: [c K]Lock±up Relay Valve15.0 / 5.0 / 3.2 (0.591 / 0.197 / 0.126)
@@@@@: [c L]2nd Coast Modulator Valve15.0 / 5.0 / 3.2 (0.591 / 0.197 / 0.126)
AX0GC±02

AUTOMATIC TRANSAXLELOWER VALVE BODY ±
AX±88
RETAINER, STRAINER AND CHECK BALLS LOCATION
RetainerHeight / Width / Thickness
mm (in.)
@@@@@: [c I]Primary Regulator Valve9.2 / 5.0 / 3.2 (0.362 / 0.197 / 0.128)
@@@@@: [c J]2±3 Shift Valve8.0 / 6.0 / 3.2 (0.315 / 0.236 / 0.126)
@@@@@: [c K]1±2 Shift Valve9.2 / 5.0 / 3.2 (0.362 / 0.197 / 0.126)
@@@@@: [c L]3±4 Shift Valve8.0 / 6.0 / 3.2 (0.315 / 0.236 / 0.126)
@@@@@: [c M]Secondary Regulator Valve13.0 / 6.0 / 3.2 (0.512 / 0.236 / 0.126)
@@@@@: [c N]Lock±up Signal Vave15.0 / 5.0 / 3.2 (0.591 / 0.197 / 0.126)
AX0GE±02

AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±76
4. INSTALL SNAP RING INTO CASE
Be sure the end gap of the snap ring is not aligned with
one of cutouts.
5. INSTALL OVERDRIVE PLANETARY GEAR ONTO OV-
ERDRIVE DIRECT CLUTCH
While turning the overdrive planetary gear clockwise,
install it onto the overdrive direct clutch.
HINT: If the overdrive planetary gear is properly installed
onto the direct clutch, the counter drive gear height from
the overdrive case will be about 24 mm (0.94 in.).

AUTOMATIC TRANSAXLEUPPER VALVE BODY ±
AX±89
RETAINERS, PIN, AND CHECK BALLS LOCATION
1. PIN, RETAINERS
MarkNameHeight / Width / Thickness
mm (in.)
@@@@@: [c A]B1 Orifice Control Valve8.9 (0.350) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c B]Low Coast Modulator Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
2. CHECK BALLS
AX0GZ±02

AUTOMATIC TRANSAXLELOWER VALVE BODY ±
AX±93
RETAINERS AND CHECK BALLS LOCATION
1. RETAINERS
MarkNameHeight / Width / Thickness mm (in.)
@@@@@: [c A]Accumulator Control Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c B]2±3 Shift Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c C]1±2 Shift Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c D]Reverse Control Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c E]Cut±Back Valve6.5 (0.256) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c F]Secondary Regulator Valve11.0 (0.433) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c G]Solenoid Modulator Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c H]Lock±Up Control Valve9.2 (0.362) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c I]Second Coast Modulator Valve8.0 (0.315) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c J]Second Lock Valve9.2 (0.362) / 11.5 (0.453) / 3.2 (0.126)
@@@@@: [c K]3±4 Shift Valve6.5 (0.256) / 5.0 (0.197) / 3.2 (0.126)
2. CHECK BALLS
Upper Side
AX0TY±01

AUTOMATIC TRANSAXLESERVICE SPECIFICATIONS ±
AX±129
Valve Body Spring
SpringFree length / Coil outer diameter
mm (in.)Total No. of coils / Color
Upper valve body
Low coast modulator valve20.2 (0.795) / 7.9 (0.311)11.9 / Purple
B1 orifice control valve24.8 (0.976) / 6.4 (0.252)12.0 / White
Down±shift plug15.0 (0.591) / 11.0 (0.433)7.0 / None
Throttle valve31.5 (1.240) / 7.0 (0.276)11.4 / Green
Lock±up relay valve26.8 (1.055) / 10.2 (0.402)10.8 / Yellow
Lower valve body
2±3 shift valve28.0 (1.102) / 9.4 (0.370)10.3 / None
Second coast modulator valve20.2 (0.795) / 7.9 (0.311)11.9 / Purple
Accumulator control vavle25.1 (0.988) / 8.6 (0.339)8.0 / Red
Secondary regulator valve46.9 (1.846) / 5.9 (0.232)21.8 / None
Second lock valve20.7 (0.815) / 7.4 (0.291)9.5 / None
Reverse control valve38.1 (1.500) / 6.5 (0.256)19.0 / White/Purple
1±2 shift valve29.2 (1.150) / 8.9 (0.350)12.0 / Light Green
3±4 shift valve28.0 (1.102) / 7.6 (0.299)10.3 / None
Primary regulator valve36.6 (1.441) / 16.1 (0.634)6.3 / None
Cut±back valve21.8 (0.858) / 6.0 (0.236)13.5 / None
Solenoid modulator valve30.2 (1.189) / 5.6 (0.220)15.3 / Purple/Pink
Valve Body Key
KeyHeight
mm (in.)Width
mm (in.)Thickness
mm (in.)
Upper valve body
B1 orifice control valve8.9 (0.350)5.0 (0.197)3.2 (0.126)
Low coast modulator valve8.5 (0.335)5.0 (0.197)3.2 (0.126)
Lower valve body
Accumulator control valve8.5 (0.335)5.0 (0.197)3.2 (0.126)
Secondary regulator valve11.0 (0.433)5.0 (0.197)3.2 (0.126)
1±2 shift valve8.5 (0.335)5.0 (0.197)3.2 (0.126)
2±3 shift valve8.5 (0.335)5.0 (0.197)3.2 (0.126)
3±4 shift valve6.5 (0.256)5.0 (0.197)3.2 (0.126)
Second lock valve9.2 (0.362)5.0 (0.197)3.2 (0.126)
Second coast modulator valve8.0 (0.315)5.0 (0.197)3.2 (0.126)
Reverse control valve8.5 (0.335)5.0 (0.197)3.2 (0.126)
Cut±back valve9.2 (0.362)5.0 (0.197)3.2 (0.126)
Solenoid modulator valve8.5 (0.335)5.0 (0.197)3.2 (0.126)
Lock±up control valve9.2 (0.315)5.0 (0.197)3.2 (0.126)

AUTOMATIC TRANSAXLEOVERDRIVE UNIT ±
AX±76
4. INSTALL SNAP RING INTO CASE
Be sure the end gap of the snap ring is not aligned with
one of cutouts.
5. INSTALL OVERDRIVE PLANETARY GEAR ONTO OV-
ERDRIVE DIRECT CLUTCH
While turning the overdrive planetary gear clockwise,
install it onto the overdrive direct clutch.
HINT: If the overdrive planetary gear is properly installed
onto the direct clutch, the counter drive gear height from
the overdrive case will be about 24 mm (0.94 in.).