1986 TOYOTA CAMRY V20 Service Information

low oil pressurewarning lightsrefuellingfuel capfuel typewasher fluid
Popular search:
mileagetowingradiator capairbaginstrumentoverheatingcheck engine light
Previous
Next
Load previous 8 pages

Page 521 of 2389

TOYOTA CAMRY V20 1986 Service Information 50. REMOVE MANUAL VALVE SHAFT (a) Using a cold chisel and hammer, cut the collar. 48. REMOVE SNAP RING FROM TRANSAXLE CASE 49. REMOVE PARKING LOCK PAWL BRACKET(d) Remove the two O±rings from the pist

Page 522 of 2389

TOYOTA CAMRY V20 1986 Service Information 51. REMOVE MANUAL VALVE SHAFT OIL SEAL Using a screwdriver, remove the oil seal.(d) Slide out the shaft from the transaxle case and remove the manual valve lever and parking lock rod. (c) Using a hamm

Page 523 of 2389

TOYOTA CAMRY V20 1986 Service Information REMOVAL OF DIFFERENTIAL COMPONENT PARTS 1. MEASURE DIFFERENTIAL TOTAL PRELOAD Using a torque meter measure the total preload, and make a note of it. (b) Using a large screwdriver, remove the LH bear-

Page 524 of 2389

TOYOTA CAMRY V20 1986 Service Information 5. REMOVE DIFFERENTIAL CASE (a) (A540E) Remove the differential case, outer race and shim from the transaxle case.(b) Tap the carrier cover with a plastic hammer to re- move it. 4. REMOVE CARRIER COVE

Page 525 of 2389

TOYOTA CAMRY V20 1986 Service Information 7. MEASURE DRIVE PINION PRELOAD Using a torque meter, measure the drive pinion pre- load. Preload (at starting) : Reused bearing 5 ± 8 kg±cm (4.3 ± 6.9 in.±lb, 0.5 ± 0.8 N±m) The total preload m

Page 526 of 2389

TOYOTA CAMRY V20 1986 Service Information 9. REMOVE OUTER RACE, SPACER AND OIL SLINGER (a) Using SST, remove the outer race. SST 09350±32014 (09308±10010) 8. REMOVE COUNTER DRIVEN GEAR (a) Using a chisel, loosen the staked part of the nut.

Page 527 of 2389

TOYOTA CAMRY V20 1986 Service Information (b) Insert the bar into the case hole to drive out the drive pin- ion. (c) Using a press, drive out the drive pinion from transaxle case. 11. (A540H) REMOVE DRIVE PINION BEARING NO. 2 SPACER 12. REMOV

Page 528 of 2389

TOYOTA CAMRY V20 1986 Service Information (e) Remove the bearing cage from drive pinion. ± AUTOMATIC TRANSAXLERemoval of Component Parts (A540E and A540H)AT±261
Load next 8 pages
Page:   < prev 1-10 ... 489-496 497-504 505-512 513-520 521-528 529-536 537-544 545-552 553-560 ... 2392 next >
hood releasephonecenter consoleresetpark assistwindshield wipers
Popular search:
tire sizewiper fluidair conditionsteering wheelheadlight aimingrefrigerant typetrailer