1986 TOYOTA CAMRY V20 Service Information

Page 953 of 2389

TOYOTA CAMRY V20 1986  Service Information Anti±lock Brake System Circuit
INSPECTION OF SYSTEM CIRCUIT
1.  INSPECT SYSTEM CIRCUIT WITH CONNECTOR
CONNECTED
(a)  Remove the A.B.S. computer.
(b)  Using a voltmeter with high impedance (10 K
/V
m

Page 954 of 2389

TOYOTA CAMRY V20 1986  Service Information 2.  INSPECT SYSTEM CIRCUIT WITH CONNECTOR
DISCONNECTED
(a)  Disconnect  the connectors from the computer, in-
spect at the wire harness side connector.
If the circuit is not as specified, check and re

Page 955 of 2389

TOYOTA CAMRY V20 1986  Service Information 1.  REMOVE A.B.S. COMPUTER
(a)  Remove the computer cover.
(b)  Remove the five screws holding the computer to the
computer bracket.
(e)  Pull out the wire harness from the clamp on the
bracket, and p

Page 956 of 2389

TOYOTA CAMRY V20 1986  Service Information 3. INSTALL DECELERATION SENSOR
(a)  Install the deceleration sensor to the bracket with the
two screws.
Torque: 32.5 kg±cm (28 in.±Ib, 3.2 N±m)
(b)  Install the connector to the clamp on the bracke

Page 957 of 2389

TOYOTA CAMRY V20 1986  Service Information CHARGING SYSTEM
± CHARGING SYSTEMCH±1

Page 958 of 2389

TOYOTA CAMRY V20 1986  Service Information PRECAUTIONS
1. Check that the battery cables are connected to the correct
terminals.
2. Disconnect the battery cables when the battery is given a
quick charge.
3. Do not perform tests with a high volt

Page 959 of 2389

TOYOTA CAMRY V20 1986  Service Information PRECAUTIONS
1. Check that the battery cables are connected to the correct
terminals.
2. Disconnect the battery cables when the battery is given a
quick charge.
3. Do not perform tests with a high volt

Page 960 of 2389

TOYOTA CAMRY V20 1986  Service Information ON±VEHICLE INSPECTION
1. INSPECT BATTERY SPECIFIC GRAVITY AND
ELECTROLYTE LEVEL
(a) Check the specific gravity of each cell.
Standard specific gravity:
1.25 ± 1.27 when fully charged at 20°C (68°F