Page 1585 of 2103
CONTENTS
GENERAL INFORMATION. . . . . . . . . . . . . . . . . .2
ON-VEHICLE SERVICE. . . . . . . . . . . . . . . . . . . . .5
Tire Inflation Pressure Check. . . . . . . . . . . . . . . . .
Tire Wear Check. . . . . . . . . . . . . . . . . . . . . . . . . . . .‘5
Wheel Check . . . . . . . .. . . . .. . . . . . . .5
SERVICE SPECIFICATIONS . . . . . . . . . .
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . .
WHEEL AND TIRE
.. . . . . . . . . . . . . . . . . . . . . . . . .
Page 1586 of 2103

WHEEL AND TIRE General Information
GENERAL’
Both steel type and aluminum type wheels have
been adopted. The typeof wheel used depends
on the vehicle model.
Item
W h e e l T y p e A compact spare tire has been adopted as the
spare tire in all models.
Medium price
ISteel
High price
ISteelISteel
Tire
Spare
wheel
NOTE
l : optional items
Item
FWD
W h e e l T y p e
Size
Premium price
.
Aluminum
Premium price
AluminumAluminum type
17
mm 46 (1.6)4646 (1.8)
Pitch diameter mm (in.)114.3 (4.5) 114.3 (4.5)114.3 (4.5)
Tire Size
SteelSteel l .wheelSize
. . . . . . .
circle diameter mm (in.)
mm46 (1.8)46 (1.8)46 (1.8)
(4.5)114.3 (4.5) 114.3 (4.5)
Spare
Size
ItemMedium price Premium price
WheelAluminum type
Aluminum type
Size
Amount of wheel offset mm (in.)
Pitch circle diameter mm (in.)
46 (1.8)46 (1.8)
114.3 ,114.3 (4.5)
Tire Size
. . .
Steel type
46 (1.8)
S p a r e T y p eSteel type
wheel
Size
Amount of wheel offset mm(in.)46 (1.8)
circle diameter mm (in.) 114.3 (4.5) 114.3 (4.5)
Spare
Size
l .optional items TSB Revision
Page 1587 of 2103
WHEEL AND TIRE Service Specifications
Limit
Tread depth of tire
Wheel
Radial
Lateral
Steel wheel1.6
,
1.2 or less
Aluminum wheel
Steel wheel or less
1.2
or less,
Aluminum wheel
1 or I
TSB Revision
Page 1588 of 2103
WHEEL AND TIRE
Symptom
Rapid wear at
shouldersProbable cause
Under-inflationor lack of
tion
Remedy Reference
Adjust the tire
Refer to
p r e s s u r e .
Rapid wear at
Over-inflation or
center
lack of rotation
I
treads Under-inflation Adjust the tireRefer to
pressure.
Wear on one side
Excessive
ber Check thecamber.
Refer to GROUP On-vehicle
Service.
Feathered edge Incorrect toe-in
Adjust the
toe-in.
Bald spots Unbalanced
wheel
Adjust the
wheels.
Scalloped wear Lack of rotation of tires or
worn orRotate the Refer to GROUP
out-of-alignment suspension check the front On-vehicle
suspension Service.
alignment.
TSB Revision
Page 1589 of 2103
WHEEL AND TIRE On-vehicle Service/Wheel and Tire
Wear indicator
TIRE INFLATION PRESSURE CHECK
NOTERefer to the inflation pressure label on the driver ’s side door.
TIRE WEAR CHECK
Measure the tread depth of tires.
Limit: 1.6 mm
in.)
If the remaining tread depth is less than the limit , replace
the tire.
NOTE
When the tread depth of tires is reduced to 1.6 mm
or less, wear indicators will appear.
WHEEL
CHECK
Jack up the vehicle so that the wheels are clear of the floor.
While slowly turning the wheel, measure wheel with
a dial indicator.
Limit:
Radial
Steel wheel; 1.2 mm in.) or less
Aluminum wheel; 1.0 mm
in.) or less
Lateral
Steel wheel; 1.2 mm in.) or less
Aluminum wheel; 1.0 mm
in.) or less
If wheel
exceeds the limit, replace the wheel.
INSTALLATION SERVICE POINT
Tighten the wheel nut to the specified torque.
Tightening torque:
Nm
TSB Revision
Page 1590 of 2103
Page 1591 of 2103
MOUNT
CONTENTS
CROSSMEMBER. . . . . . . . . . . . . . . . . . . . . . . . . . .9SERVICE SPECIFICATIONS....‘::. . . . . . . . . . . .3
ENGINE MOUNTING. . . . . . . . . . . . . . . . . . . . . . .4SPECIAL TOOLS. . . . . . . . . . . . . . . . . . . . . . . . . . .3
...
ENGINE ROLL STOPPER,TRANSAXLE. . . . . . . . . . .. . . . . .
CENTERMEMBER. . . . . . . . . . . . . . . . . . . . . . . . . .7
TROUBLESHOOTING
. . . . . . . . . . . . . . . . . . . . . .3
GENERAL INFORMATION. . . . . . . . . . . . . . . . . .2
Page 1592 of 2103
32-2POWER PLANT MOUNT General Information
The engine-transaxle mount is of an inertial axisthe front upper part of the engine at the front and
supporting type whose excellent features have
the rear upper part of the transaxle at the rear.
ready been proven in many Mitsubishi vehicles.
This arrangement effectively suppressesthe engine
The inertial s u p p o r t i n g t y p e m o u n t
CONSTRUCTION,
Engine (Non-turbo)>
Engine mount
, ,
Transaxle
mount
Engine (Turbo) and Engine>
TransaxlemountCrossmemberI
FRONT
Rear roll
stopper
mount
Transaxle
mount
TSB Revision