Page 1449 of 2103
AUTOMATIC TRANSAXLE OVERHAUL
the snap the low/reverse
plug (cover) in place.
return spring and two seal rings from the overdrive
and clutch accumulator pistons.
clutch accumulator and
accumulator with springs and Seal rings:
detent as shown.
valve body.
TSB Revision
Page 1450 of 2103
oil filter..
oil pan.
NOTE
Apply a
inch wide bead of 8718
oil pan bolts.
NOTE
Use 18718 or equivalent
TSB Revision
Page 1451 of 2103
AUTOMATIC TRANSAXLE OVERHAUL Input Clutches
Reverse clutchScrewdriver
clutch p l a t e flat side
clutch
plateReverse
19
Place input clutches assembly on wood blocks equivalent,
as shown to facilitate disassembly and reassembly.
(1) Tap down reverse clutch reaction plate to
(or
install) snap ring.
(2) Using a screwdriver, remove the reverse snap ring.
(3) Loosen reverse clutch reaction plate by prying at
locations with screwdrivers as shown.
(4) Remove reverse clutch reaction plate.
,
(5) Remove clutch plates and discs. Tie plates and discs together so they go back in ‘t he
same location.
TSB Revision
Page 1452 of 2103
pressure
plate (step
side down)
shaftassembly
Overdrive
shaft assembly
and OD
clutch pack
assembly
Overdrive shaft
( 7 ) R e m o v e
.
(8) Remove overdrive/reverse clutch snap with
a screwdriver.
(9) overdrive shaft assembly
overdrive clutch .
Tie plates and
together so they go back ‘in ‘the
same location.
Revision
Page 1453 of 2103
AUTOMATIC TRANSAXLE OVERHAUL
No. 3 thrust
washer (5 tabs)
(not
I
clutches reaction plate
tapered snap ring
clutch
reaction
(ll)Remove No, 3 and 4 thrust plates
shaft assembly.
s h a f t
,
N o . 2 n e e d l e
I.tapered snap ring.
Do not scratch reaction plate.
.
TSB Revision
Page 1454 of 2103
Underdrive clutch
reaction plate flat
snap ring
Screwdriver
clutch
.
clutch plates and discs.
Tie together so plates and
location.. ..
(19) Remove snap ring with ,
return spring with Spring
press ram.
Caution
Compress return spring just to snap
ring..
nap ring
Piston return
spring spring retainer spring. .
.
TSB Revision
Page 1455 of 2103
hub snapring
Plastic hammer
shaft and assemblyInput clutches
retainer
Overdrive/reverse
Overdrive/reverse
piston
input hub ring with snap ring pliers.
on input and hub assembly with a plastic
hammer.
input shaft hub assembly.
overdrive/reverse piston.
TSB Revision
Page 1456 of 2103
AUTOMATIC TRANSAXLE OVERHAUL Input
Arbor press ram(compress return
spring just enough
to remove snap ring)Snap ring
Return
spring
I.
snap ring with a screwdriver while compressing
return spring with Disc press ram.
snap ring and return spring.
TSB Revision
input shaft snap ring.
input shaft from hub.