Page 513 of 2000
EXTERIOR – FRONT BUMPERET–7
ET
(b) Detach the 6 claws and remove the radiator grille.
2. REMOVE NO. 1 RADIATOR GRILLE LOWER
(a) Detach the 18 claws and remove the radiator grille.
3. REMOVE NO. 2 RADIATOR GRILLE LOWER
(a) Detach the 16 claws and remove the radiator grille.
4. REMOVE FRONT BUMPER ARM HOLE COVER LH
(a) Detach the 2 claws and disconnect the arm hole
cover.
(b) Remove the hook and bumper arm hole cover.
5. REMOVE FRONT BUMPER ARM HOLE COVER RH
(a) Use the same procedures described for the LH side.
B136794
B135283
B135284
B127941
Page 514 of 2000

ET–8EXTERIOR – FRONT BUMPER
ET
6. REMOVE FOG LIGHT ASSEMBLY LH
(a) Remove the screw and fog light.
(b) Remove the 3 bolts and fog light mounting bracket.
7. REMOVE FOG LIGHT ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
8. REMOVE FRONT BUMPER HOLE COVER LH (w/o
Fog Light)
(a) Remove the 3 bolts, bumper hole cover and fog light
mounting bracket.
9. REMOVE FRONT BUMPER HOLE COVER RH (w/o
Fog Light)
HINT:
Use the same procedures described for the LH side.
10. REMOVE FRONT BUMPER EXTENSION LH (for Wide
Body)
(a) Detach the 7 outside moulding retainers and
remove the extension LH.
NOTICE:
• If reusing the extension, take care not to
damage the extension.
• Be careful not to damage the vehicle body.
11. REMOVE FRONT BUMPER EXTENSION RH (for Wide
Body)
HINT:
Use the same procedures described for the LH side.
REASSEMBLY
1. INSTALL FRONT BUMPER EXTENSION LH (for Wide
Body)
(a) Attach the 7 outside moulding retainers to install the
extension.
2. INSTALL FRONT BUMPER EXTENSION RH (for Wide
Body)
HINT:
Use the same procedures described for the LH side.
B133193
B133194
B133748
B133748
Page 515 of 2000
EXTERIOR – FRONT BUMPERET–9
ET
3. INSTALL FRONT BUMPER HOLE COVER LH (w/o
Fog Light)
(a) Install the bumper hole cover with the fog light
mounting bracket and 3 bolts.
4. INSTALL FRONT BUMPER HOLE COVER RH (w/o
Fog Light)
HINT:
Use the same procedures described for the LH side.
5. INSTALL FOG LIGHT ASSEMBLY LH
(a) Install the fog light mounting bracket with the 3 bolts.
(b) Install the fog light with the screw.
6. INSTALL FOG LIGHT ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
7. INSTALL FRONT BUMPER ARM HOLE COVER LH
(a) Install the hook.
(b) Attach the 2 claws and install the hole cover.
8. INSTALL FRONT BUMPER ARM HOLE COVER RH
HINT:
Use the same procedures described for the LH side.
9. INSTALL NO. 2 RADIATOR GRILLE LOWER
(a) Install the radiator grille and attach the 16 claws.
10. INSTALL NO. 1 RADIATOR GRILLE LOWER
(a) Install the radiator grille and attach the 18 claws.
B133194
B133193
B127941
B135284
B135283
Page 516 of 2000
ET–10EXTERIOR – FRONT BUMPER
ET
11. INSTALL RADIATOR GRILLE SUB-ASSEMBLY
(a) Install the radiator grille with the 6 claws.
(b) Install the 4 bolts and 4 nuts.
B136794
B135282
Page 517 of 2000
EXTERIOR – FRONT PILLAR UPPER COVERET–49
ET
INSTALLATION
HINT:
• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.
1. INSTALL FRONT PILLAR COVER SUB-ASSEMBLY
UPPER LH
(a) Attach the 3 clips to install the pillar cover.
B127936
Page 518 of 2000
2GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEMES–7
ES
SYSTEM DIAGRAM
A136181E02
Page 519 of 2000
ES–82GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM
ES
A136182E01
Page 520 of 2000
2GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEMES–9
ES
A136183E01