2006 TOYOTA RAV4 Service Repair Manual

Page 1161 of 2000

TOYOTA RAV4 2006  Service Repair Manual AX–168U151F AUTOMATIC TRANSAXLE  –  FLOOR SHIFT ASSEMBLY
AX
• After installing, check that the lock of the 
cable outer is protruding beyond portion A-A, 
as shown in the illustration. 
(c) Conn

Page 1162 of 2000

TOYOTA RAV4 2006  Service Repair Manual AX–170U151F AUTOMATIC TRANSAXLE  –  DIFFERENTIAL OIL SEAL
AX
REPLACEMENT
1. REPLACE TRANSAXLE HOUSING OIL SEAL LH
(a) Drain the automatic transaxle fluid.
(1) Remove the drain plug and gasket, and

Page 1163 of 2000

TOYOTA RAV4 2006  Service Repair Manual U151F AUTOMATIC TRANSAXLE  –  DIFFERENTIAL OIL SEALAX–171
AX
(f) Remove the transaxle housing oil seal RH.
(1) Using a screwdriver with vinyl tape wound 
around its tip, remove the oil seal.
NOTIC

Page 1164 of 2000

TOYOTA RAV4 2006  Service Repair Manual AX–176U151F AUTOMATIC TRANSAXLE  –  AUTOMATIC TRANSAXLE ASSEMBLY
AX
INSTALLATION
1. INSPECT TORQUE CONVERTER CLUTCH 
ASSEMBLY
(a) Inspect the torque converter clutch (see page AX-
179).
2. INSTALL

Page 1165 of 2000

TOYOTA RAV4 2006  Service Repair Manual U151F AUTOMATIC TRANSAXLE  –  AUTOMATIC TRANSAXLE ASSEMBLYAX–177
AX
6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
(a) Install the automatic transaxle to the engine with the 
7 upper side mounting bolts.

Page 1166 of 2000

TOYOTA RAV4 2006  Service Repair Manual AX–178U151F AUTOMATIC TRANSAXLE  –  AUTOMATIC TRANSAXLE ASSEMBLY
AX
9. INSTALL FRONT ENGINE MOUNTING BRACKET
(a) Install the mounting bracket with the 4 bolts.
Torque: 64 N*m (657 kgf*cm, 47 ft.*l

Page 1167 of 2000

TOYOTA RAV4 2006  Service Repair Manual U151F AUTOMATIC TRANSAXLE  –  AUTOMATIC TRANSAXLE ASSEMBLYAX–179
AX
16. INSPECT AUTOMATIC TRANSAXLE FLUID
(a) Inspect the automatic transaxle fluid (see page AX-
126).
17. PERFORM RESET MEMORY
(a)

Page 1168 of 2000

TOYOTA RAV4 2006  Service Repair Manual AX–190U151F AUTOMATIC TRANSAXLE  –  AUTOMATIC TRANSAXLE UNIT
AX
DISASSEMBLY
1. REMOVE PARK/NEUTRAL POSITION SWITCH 
ASSEMBLY
(a) Remove the nut, washer and control shaft lever.
(b) Using a screwdr