2001 NISSAN ALMERA N16 Electronic Repair Manual

Page 1377 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual 3 CHECK INPUT SIGNAL OF A/T FLUID TEMPERATURE SENSOR (Without CONSULT-II)
Without CONSULT-II
1. Start engine.
2. Check voltage between TCM terminal 47 and ground while warming up A/T.
Voltage:
Cold [2

Page 1378 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual 5 CHECK A/T FLUID TEMPERATURE SENSOR WITH TERMINAL CORD ASSEMBLY
1. Turn ignition switch to ªOFFº position.
2. Disconnect terminal cord assembly connector in engine compartment.
3. Check resistance

Page 1379 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual SAT357H
DescriptionNJAT0272The revolution sensor detects the revolution of the idler gear park-
ing pawl lock gear and emits a pulse signal. The pulse signal is sent
to the TCM which converts it into

Page 1380 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual SAT014K
SAT971J
SAT014K
SAT020K
DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION
PROCEDURE
NJAT0272S03CAUTION:
+Always drive vehicle at a safe speed.
+Be careful not to rev engine into the red zone on the
t

Page 1381 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual Wiring Diagram Ð AT Ð VSSA/TNJAT0273
YAT233
DTC P0720 VEHICLE SPEED SENSOR´A/T
(REVOLUTION SENSOR)
EURO-OBD
Wiring Diagram Ð AT Ð VSSA/T
AT-195

Page 1382 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual Diagnostic ProcedureNJAT0274
1 CHECK INPUT SIGNAL (With CONSULT-II)
With CONSULT-II
1. Start engine.
2. Select ªECU INPUT SIGNALSº in ªDATA MONITORº mode for ªA/Tº with CONSULT-II.
SAT014K
3. Re

Page 1383 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual 3 CHECK DTC
Perform Diagnostic Trouble Code (DTC) confirmation procedure, AT-194.
OK or NG
OK©INSPECTION END
NG©GO TO 4.
4 CHECK TCM INSPECTION
1. Perform TCM input/output signal inspection.
2. If N

Page 1384 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual DescriptionNJAT0276The engine speed signal is sent from the ECM to the TCM.
TCM TERMINALS AND REFERENCE VALUENJAT0276S01Remarks: Specification data are reference values.
Terminal
No.Wire color Item Co