2001 NISSAN ALMERA N16 Electronic Repair Manual

Page 257 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual SMA390C
5. Check oil level.
6. Start engine and check area around drain plug and oil filter for
oil leakage.
7. Run engine for a few minutes, then turn it off. After several
minutes, check oil level.

Page 258 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual Service Data and Specifications (SDS)
OIL PRESSURE CHECKNJLC0011
Engine speed
rpmApproximate discharge pressure
kPa (bar, kg/cm2, psi)
600 More than 98 (0.98, 1.0, 14)
2,000 More than 294 (2.94, 3.0,

Page 259 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual SEM164F
AEM080
Precautions
LIQUID GASKET APPLICATION PROCEDURENJLC00141. Use a scraper to remove all traces of old liquid gasket from
mating surfaces and grooves. Also, completely clean any oil
from t

Page 260 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual Cooling CircuitNJLC0016
SLC317B
System CheckNJLC0017WARNING:
Never remove the radiator cap when the engine is hot. Serious
burns could occur from high pressure fluid escaping from the
radiator.
Wrap a

Page 261 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual CHECKING RADIATORNJLC0017S04Check radiator for mud or clogging. If necessary, clean radiator as
follows.
+Be careful not to bend or damage the radiator fins.
+When radiator is cleaned without removal,

Page 262 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual Water Pump
REMOVAL AND INSTALLATIONNJLC0018
SEM858F
SEM859F
CAUTION:
+When removing water pump assembly, be careful not to
get coolant on drive belt.
+Water pump cannot be disassembled and should be
r

Page 263 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual Thermostat
REMOVAL AND INSTALLATIONNJLC0021
SEM861F
Be careful not to spill coolant over engine compartment. Use
a rag to absorb coolant.
1. Drain engine coolant.
Refer to LC-17, ªChanging Engine Coo

Page 264 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual SLC343
INSPECTIONNJLC00221. Check for valve seating condition at normal room temperature.
It should seat tightly.
2. Check valve opening temperature and valve lift.
Valve opening temperature ÉC (ÉF)