2001 NISSAN ALMERA N16 Electronic Repair Manual

Page 201 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual JEM163G
CAMSHAFT END PLAYNJEM0065S061. Install camshaft in cylinder head.
2. Measure camshaft end play.
Camshaft end play:
Standard
0.070 - 0.148 mm (0.0028 - 0.0058 in)
Limit
0.24 mm (0.0094 in)
+If

Page 202 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual SEM008A
VALVE GUIDE REPLACEMENTNJEM0065S09+When a valve guide is removed, replace with an oversized [0.2
mm (0.008 in)] valve guide.
1. To remove valve guide, heat cylinder head to 110 to 130ÉC
(230

Page 203 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual SEM934C
JEM157G
VALVE SEATSNJEM0065S10+Before starting this check, confirm that the dimensions of valve
guides and valves are as specified.
+Apply red lead primer on contacting surfaces of valve seat

Page 204 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual JEM158G
SEM301G
3. Heat cylinder head to 110 to 120ÉC (230 to 248ÉF) by soaking
in heated oil.
4. Sufficiently cool valve seat with dry ice. Force fit valve seat into
cylinder head.
WARNING:
Do not

Page 205 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual SEM188A
VALVE DIMENSIONSNJEM0065S12Check dimensions of each valve. For dimensions, refer to SDS
(EM-160).
When valve head has been worn down to 0.5 mm (0.020 in) in
margin thickness, replace valve.
Gr

Page 206 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual SEM867E
Lifter guide bore diameter:
30.000 - 30.021 mm (1.1811 - 1.1819 in)
Clearance between lifter and lifter guide:
Standard 0.025 - 0.061 mm (0.0010 - 0.0024 in)
+If the value is out of the range,

Page 207 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual Installation=NJEM0067+Before installation, remove old liquid gasket from mating
surface of all liquid gasket applied parts.
SEM505G
CYLINDER HEAD GASKET SELECTIONNJEM0067S01+Select and install cylinde

Page 208 of 2493

NISSAN ALMERA N16 2001  Electronic Repair Manual Piston protrusion mm (in)Gasket thickness*
mm (in)Identification
Number of holes
Less than 0.255 (0.0100) 0.900 (0.0354) 1
Less than 0.255 - 0.280
(0.0100 - 0.0110)0.925 (0.0364) 2
Less than 0.280 - 0