Page 857 of 3061
BL-146
< SERVICE INFORMATION >
BODY REPAIR
The following figure shows the areas which are sealed at the factory. Sealant which has been applied to these
areas should be smooth and free from cuts or gaps. Care should be taken not to apply an excess amount of
sealant and not to allow other unaffected parts to come into contact with the sealant.
LIIA1439E
Page 858 of 3061
BODY REPAIR
BL-147
< SERVICE INFORMATION >
C
D
E
F
G
H
J
K
L
MA
B
BL
N
O
P
WIIA0278E
Page 859 of 3061
BL-148
< SERVICE INFORMATION >
BODY REPAIR
LIIA0912E
Page 860 of 3061
BODY REPAIR
BL-149
< SERVICE INFORMATION >
C
D
E
F
G
H
J
K
L
MA
B
BL
N
O
P
Body ConstructionINFOID:0000000003533009
BODY CONSTRUCTION
Body AlignmentINFOID:0000000003533010
BODY CENTER MARKS
LIIA1113E
Page 861 of 3061
BL-150
< SERVICE INFORMATION >
BODY REPAIR
A mark has been placed on each part of the body to indicate the vehicle center. When repairing parts dam-
aged by an accident which might affect the vehicle frame (members, pillars, etc.), more accurate and effective
repair will be possible by using these marks together with body alignment specifications.
PANEL PARTS MATCHING MARKS
LIIA1440E
Page 862 of 3061

BODY REPAIR
BL-151
< SERVICE INFORMATION >
C
D
E
F
G
H
J
K
L
MA
B
BL
N
O
P
A mark has been placed on each body panel to indicate the parts matching positions. When repairing parts
damaged by an accident which might affect the vehicle structure (members, pillars, etc.), more accurate and
effective repair will be possible by using these marks together with body alignment specifications.
DESCRIPTION
• All dimensions indicated in the figures are actual.
• When using a tracking gauge, adjust both pointers to equal length. Then check the pointers and gauge itself
to make sure there is no free play.
• When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
• Measurements should be taken at the center of the mounting holes.
• An asterisk (*) following the value at the measuring point indicates that the measuring point on the other side
is symmetrically the same value.
• The coordinates of the measurement points are the distances measured from the standard line of "X", "Y"
and "Z".
WIIA0284E
Page 863 of 3061
BL-152
< SERVICE INFORMATION >
BODY REPAIR
Engine Compartment
LIIA1506E
Page 864 of 3061
BODY REPAIR
BL-153
< SERVICE INFORMATION >
C
D
E
F
G
H
J
K
L
MA
B
BL
N
O
P MEASUREMENT
WIIA0551E