2004 DAEWOO NUBIRA Service Repair Manual

oil viscosityheadlight aimingjacking pointsinflation pressureflat tirekeyless entry
Popular search:
air conditioningVacuumESP inoperativelengthheatertire typefuel filter location
Previous
Next
Load previous 8 pages

Page 953 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual REAR SUSPENSION 2D – 11 DAEWOO V–121 BL4 Installation Procedure 1. Install the rear trailing link. 2. Install the rear trailing link bracket nut and the bolt. Tighten Tighten the rear trailing

Page 954 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual 2D – 12IREAR SUSPENSION DAEWOO V–121 BL4 2. Install the trailing link bracket–to–body bolts. Tighten Tighten the trailing link bracket–to–body bolts to 70 NSm (52 lb–ft). 3. Connect th

Page 955 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual REAR SUSPENSION 2D – 13 DAEWOO V–121 BL4 REAR PARALLEL LINK Removal Procedure 1. Raise and suitably support the vehicle. 2. Remove the wheel. Refer to Section 2E, Tires and Wheels. Important :

Page 956 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual 2D – 14IREAR SUSPENSION DAEWOO V–121 BL4 Installation Procedure 1. Install the stabilizer shaft, the insulators, and the stabilizer shaft clamps. 2. Install the stabilizer shaft–to–stabiliz

Page 957 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual REAR SUSPENSION 2D – 15 DAEWOO V–121 BL4 5. Remove the crossmember–to–body bolts. 6. Remove the crossmember. Installation Procedure 1. Install the crossmember. 2. Install the crossmember

Page 958 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual 2D – 16IREAR SUSPENSION DAEWOO V–121 BL4 Installation Procedure 1. Install the hub assembly. Tighten Tighten the hub assembly bolts to 65 NSm (48 lb–ft). 2. Install the hub nut. 3. On vehicl

Page 959 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual REAR SUSPENSION 2D – 17 DAEWOO V–121 BL4 UNIT REPAIR SPRINGS AND INSULATORS Tools Required KM–329–A Spring Compressor Disassembly Procedure 1. Remove the rear strut assembly from the vehicle

Page 960 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual 2D – 18IREAR SUSPENSION DAEWOO V–121 BL4 5. Install the lock nut onto the strut dampener rod. Tighten Tighten the ball joint–to–control arm nuts to 100 NSm (74 lb–ft). Tighten the strut dam
Load next 8 pages
Page:   < prev 1-10 ... 921-928 929-936 937-944 945-952 953-960 961-968 969-976 977-984 985-992 ... 2648 next >
heaterbonnetbrake padstire pressure resetwheeldisplay
Popular search:
pillarautomatic transmissionair filterengine eDTC P0342lightremove seats