2004 DAEWOO NUBIRA Service Repair Manual

child seatradiowarningair filterkeylessaudio
Popular search:
fuel typewasher fluidoil leveltransmission oilfour wheel drivecoolant leveltechnical data
Previous
Next
Load previous 8 pages

Page 857 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual ENGINE CONTROLS 1F – 611 DAEWOO V–121 BL4 Installation Procedure 1. Install the manifold absolute pressure (MAP) sen- sor with the bolt. Tighten Tighten the MAP sensor bolt to 8 NSm (71 lb–in

Page 858 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual 1F – 612IENGINE CONTROLS DAEWOO V–121 BL4 Installation Procedure 1. Install the EEGR valve with the bolts. Tighten Tighten the electrical exhaust gas recirculation valve retaining bolts to 30 NS

Page 859 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual ENGINE CONTROLS 1F – 613 DAEWOO V–121 BL4 4. Disconnect the knock sensor electrical connector. 5. Remove the knock sensor bolt. 6. Remove the knock sensor. Installation Procedure 1. Install

Page 860 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual 1F – 614IENGINE CONTROLS DAEWOO V–121 BL4 4. Remove the bolt and the knock sensor. Installation Procedure 1. Install the knock sensor with the bolt. Tighten Tighten the knock sensor bolt to 20

Page 861 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual ENGINE CONTROLS 1F – 615 DAEWOO V–121 BL4 Installation Procedure 1. Insert the canister into the track and slide it into position. 2. Connect the canister fuel vapor hoses. Tighten Tighten the

Page 862 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual 1F – 616IENGINE CONTROLS DAEWOO V–121 BL4 3. Remove the crankshaft position sensor (CKP) bolt. 4. Remove the CKP sensor. Installation Procedure 1. Install the CKP sensor with the bolt. Tighten

Page 863 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual ENGINE CONTROLS 1F – 617 DAEWOO V–121 BL4 5. Remove the accessory mounting bracket by remov- ing the bolts. 6. Disconnect the crankshaft position (CKP) sensor connector. 7. Remove the CKP sens

Page 864 of 2643

DAEWOO NUBIRA 2004 Service Repair Manual 1F – 618IENGINE CONTROLS DAEWOO V–121 BL4 CAMSHAFT POSITION SENSOR (1.4L/1.6L DOHC) Removal Procedure 1. Disconnect the negative battery cable. 2. Remove the engine cover bolts and the nuts. 3.
Load next 8 pages
Page:   < prev 1-10 ... 825-832 833-840 841-848 849-856 857-864 865-872 873-880 881-888 889-896 ... 2648 next >
sunroofheatercoolant reservoirodometerservicesteering wheel
Popular search:
fuse box diagramtransmission oilIMMOBLIZERlightscamshaft sensorset clockbrake sensor