2007 KIA CARNIVAL Workshop Manual

2007 > 2.7L V6 GASOLINE >
DESCRIPTION
1.Humidity sensor is located at the lower crush pad and detected in - car humidity for in - car humidity control.
2. If ambient air temperature or in - car humidity is outside certain range, it will turn on A/C to control in - car humidity
preventing in car fogging.
Air conditioner operation depends on ambient temperature and humidity.

2007 > 2.7L V6 GASOLINE >
INSPECTION
1.Ignition "ON"
2. Using the scan tool.
3. Check the frequency of humidity sensor between terminals 2 and 3.
Humidity (%) Frequency between terminals 2and 3 (Hz)
30 6976 ± 5%
50 6728 ± 5%
60 6600 ± 5%
70 6468 ± 5%
80 6330 ± 5%
90 6186 ± 5%
4. If the measured resistance is not specification, substitute with a known- good humidity sensor and check for proper
operation.
5. If the problem is corrected, replace the Humidity sensor.
REPLACEMENT
1.Disconnect the negative ( - ) battery terminal.
2. Remove the center facia lower panel (A). (Refer to BD group)
3. Disconnect the humidity sensor connector (A).
4. Loosen 2 screws and then remove the humidity sensor (B).
5.Installation is the reverse order of removal.

Heater

2007 > 2.7L V6 GASOLINE >
COMPONENT LOCATION
COMPONENTS