Page 953 of 1575
2007 > 2.7L V6 GASOLINE >
COMPONENTS
Page 954 of 1575
2007 > 2.7L V6 GASOLINE >
REMOVAL
1.Remove the front wheel speed sensor mounting bolt (A) and the wire bracket mounting bolt (B)..
2.Remove the wire bracket bolt (A).
3.Remove the front wheel guard.
4. Remove the front wheel speed sensor after disconnecting the wheel speed sensor connector (A).
INSPECTION
1.Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
In order to protect the wheel speed sensor, when measuring output voltage, a 75Ω resistor must be used as
shown.
Page 955 of 1575
2.Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage
as shown below.
a.V_low : 0.44 V ~ 0.63 V
b. V_high : 0.885 V ~ 1.26 V
c. Frequency range : 1~2,500 Hz
Page 956 of 1575
Page 957 of 1575
2007 > 2.7L V6 GASOLINE >
COMPONENTS
Page 958 of 1575
2007 > 2.7L V6 GASOLINE >
REMOVAL
1.Remove the rear wheel speed sensor mounting bolt (A).
2.Remove the rear seat side pad then disconnect the rear wheel speed sensor connector (A).
INSPECTION
1.Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
In order to protect the wheel speed sensor, when measuring output voltage, a 75Ω resistor must be used as
shown.
2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage
as shown below.
Page 959 of 1575
a.V_low : 0.44 V ~ 0.63 V
b. V_high : 0.885 V ~ 1.26 V
c. Frequency range : 1~2,500 Hz
Page 960 of 1575
EBFD
(Electronic Brake Force Distribution)