2007 KIA CARNIVAL Workshop Manual

detected.
4. A Diagnostic Trouble Code(DTC) will automatically erase from ECM memory if the same malfunction is not detected
for 40 driving cycles.
a.A "warm- up cycle" means sufficient vehicle operation such that the coolant temperature has risen by at least
40 degrees Fahrenheit from engine starting and reaches a minimum temperature of 160 degress Fahrenheit.
b. A "driving cycle" consists of engine startup, vehicle operation beyond the beginning of closed loop operation.

2007 > 2.7L V6 GASOLINE >
COMPONENT LOCATION
1. PCM (Powertrain Control Module) 2. Mass Air Flow Sensor (MAFS)
3. Intake Air Temperature Sensor (IATS)

4. Manifold Absolute Pressure Sensor (MAPS)
17. ETC Module [Throttle Position Sensor (TPS) + ETC
Motor]5. Engine Coolant Temperature Sensor (ECTS)
7. Camshaft Position Sensor (CMPS) [Bank2]
6. Camshaft Position Sensor (CMPS) [Bank 1]
8. Crankshaft Position Sensor (CKPS)
9. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 1]10. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 2]
11. Heated Oxygen Sensor (HO2S) [Bank 2 / Sensor 1]12. Heated Oxygen Sensor (HO2S) [Bank 2 / Sensor 2]

13. Knock Sensor (KS) [Bank 1]
14. Knock Sensor (KS) [Bank 2]15. Injector
26. Ignition Coil
16. Accelerator Position Sensor (APS)18. CVVT Oil Control Valve (OCV) [Bank 1]
19. CVVT Oil Control Valve (OCV) [Bank 2]
20. CVVT Oil Temperature Sensor (OTS)
21. Purge Control Solenoid Valve (PCSV)
22. Variable Intake Solenoid (VIS) #1 Valve (Surge Tank
Side)

23. Variable Intake Solenoid (VIS) #2 Valve (Intake
Manifold Side)24. Fuel Pump Relay
25. Main Relay
27. Wheel Speed Sensor (WSS)
28. Vehicle Speed Sensor (VSS)
31. A/C Pressure Transducer (APT)

Engine Control Module(ECM)

2007 > 2.7L V6 GASOLINE >
CIRCUIT DIAGRAM