1997 SSANGYONG KORANDO Service Repair Manual

Page 657 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1B3 -- 108 OM600 ENGINE MECHANICAL
D AEW OO M Y_2000
5. Using the press lever (14), press the spring retainer
downward and remove the valve cotters (2) with
magnetic finger (15).
Notice
Be careful not

Page 658 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual OM600 ENGINE MECHANICAL 1B3 -- 109
D AEW OO M Y_2000
VALVE SPRINGS (CYLINDER HEAD INSTALLED)
Preceding Work : Removal of camshaft
1 Valve Tappet
2 Valve Cotters
3 Spring Retainer4 Valve Spring Check,

Page 659 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1B3 -- 110 OM600 ENGINE MECHANICAL
D AEW OO M Y_2000
Removal & Installation Procedure
1. Remove the valve tappet (1) with magentic lifter.
Notice
Place the valve tappets upside down (open end up-
ward

Page 660 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual OM600 ENGINE MECHANICAL 1B3 -- 111
D AEW OO M Y_2000
6. Remove the spring retainer(3) and spring (4).
7. Check the valve spring and replace if necessary.
8. Insert valve spring (4) with the color codi

Page 661 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1B3 -- 112 OM600 ENGINE MECHANICAL
D AEW OO M Y_2000
VALVE STEM SEALS
Preceding Work : Removal of camshaft
1 Valve Tappet
2 Valve Cotters
3 Spring Retainer4 Valve Spring Check, replace if necessary...

Page 662 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual OM600 ENGINE MECHANICAL 1B3 -- 113
D AEW OO M Y_2000
Tools Required
667 589 00 31 00 Press Lever
104 589 00 37 00 Pliers
102 589 03 40 00 Magnetic Lifter
603 589 01 40 00 Holding Wheel
601 589 02 43 0

Page 663 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1B3 -- 114 OM600 ENGINE MECHANICAL
D AEW OO M Y_2000
Replacement Procedure
1. Remove the valve tappet (1) with magnetic lifter.
Notice
Place the valve tappets upside down (open end up-
ward).
Magnetic

Page 664 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual OM600 ENGINE MECHANICAL 1B3 -- 115
D AEW OO M Y_2000
6. Remove the spring retainer(3) and valve spring (4).
7. Remove the valve stem seal (5).
Pliers 104 589 00 37 00
8. Insert the cap (12) onto the v