1997 SSANGYONG KORANDO Service Repair Manual

Page 145 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual M162 ENGINE COOLING 1D1 -- 9
D AEW OO M Y_2000
Removal & Installation Procedure
1. Drain the coolant.
2. Disconnect the water pump wire connector.
3. Loosen the hose clip and dsconnect all hoses from

Page 146 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1D1 -- 10 M162 ENGINE COOLING
D AEW OO M Y_2000
THERMOSTAT
1 Thermostat Cover
2 Thermostat
3O--ring
4 Thermostat Cover Bracket5 Bolt (M6 X 25, 3 pieces)
9--11 NSm (80-- 97 lb-in) .....................

Page 147 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual M162 ENGINE COOLING 1D1 -- 11
D AEW OO M Y_2000
OIL COOLER PIPE LINE
Preceding Work: Removal of intake air duct
1 Bolt (M6 X 35, 1 piece)
9--11 NSm (80-- 97 lb-in) .....................
2 Bolt (M6 X 1

Page 148 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1D1 -- 12 M162 ENGINE COOLING
D AEW OO M Y_2000
COOLING FAN AND VISCOUS CLUTCH
Preceding Work: Removal of cooling fan shroud
1 Cooling Fan Pulley
2 Viscous Clutch
3 Cooling Fan4 Bolt (M6 X 12, 4 piece

Page 149 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual M162 ENGINE COOLING 1D1 -- 13
D AEW OO M Y_2000
Tools Required
603 589 00 40 00 Fan Clutch Holder
1. Remove the engine hanger bracket bolts.
Installation Notice
Tightening Torque
22.5 -- 27.5 NSm
(16.

Page 150 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1D1 -- 14 M162 ENGINE COOLING
D AEW OO M Y_2000
COOLING FAN SHROUD
1 Clip
2 Lower Fan Shroud
3Bolt4 Fan Shroud Assembly
5Radiator
Removal & Installation Procedure
1. Pull out the 2 clips (1) from the

Page 151 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual M162 ENGINE COOLING 1D1 -- 15
D AEW OO M Y_2000
RADIATOR
Preceding Work: Removal of cooling fan shroud
1 Radiator Inlet Coolant Hose
2 Radiator Outlet Coolant Hose
3 Make Up Coolant Hose
4 Automatic T

Page 152 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1D1 -- 16 M162 ENGINE COOLING
D AEW OO M Y_2000
Removal & Installation Procedure
1. Drain coolant from the radiator.
2. Remove the coolant thermo connector from the ra-
diator.
3. Remove the each cool