1997 SSANGYONG KORANDO Service Repair Manual

Page 257 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1F1 -- 94 M162 ENGINE CONTROLS
D AEW OO M Y_2000
IMMOBILIZER
KAB1F360
Failure
CodeDescriptionTrouble AreaMaintenance Hint
25Communication with
transponder missingWhen missing the
transponder signal
DI

Page 258 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual M162 ENGINE CONTROLS 1F1 -- 95
D AEW OO M Y_2000
MAINTENANCE AND REPAIR
KAA1F430
ON VEHICLE SERVICE
DISCHARGING THE PRESSURE IN
FUEL SYSTEM
Removal and Installation Procedure
1. Remove the fuel pressu

Page 259 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1F1 -- 96 M162 ENGINE CONTROLS
D AEW OO M Y_2000
YAA1F550
8. Using the fuel tank cap wrench 661 589 00 46 00,
remove the locking cap.
9. Remove the pump from the fuel tank.
Notice:Check the condition

Page 260 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual M162 ENGINE CONTROLS 1F1 -- 97
D AEW OO M Y_2000
KAA1F370
FUEL TANK
Removal and Installation Procedure
Caution: The fuel system is under pressure. To
avoid fuel spillage and the risk of personal injur

Page 261 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1F1 -- 98 M162 ENGINE CONTROLS
D AEW OO M Y_2000
YAA1F180
14. Turn the roll over valves counterclockwise at an
angle of 90 degrees.
15. Turn the lock ring counterclockwise.
16. Remove and discard the

Page 262 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual M162 ENGINE CONTROLS 1F1 -- 99
D AEW OO M Y_2000
KAA1F440
FUEL RAIL AND INJECTORS
Removal and Installation Procedure
Caution: The fuel system is under pressure. To
avoid fuel spillage and the risk of

Page 263 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1F1 -- 100 M162 ENGINE CONTROLS
D AEW OO M Y_2000
KAA1F090
Notice:Before removal, the fuel rail assembly may be
cleaned with a spray-type cleaner, following package in-
structions. Do not immerse the

Page 264 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual M162 ENGINE CONTROLS 1F1 -- 101
D AEW OO M Y_2000
KAA1C010
THROTTLE BODY (INTEGRATED
WITH THE ACTUATOR)
Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. Disconnect the m