2001 INFINITI QX4 Factory Service Manual

check oilair conditionheightwiperssensoralternator belt
Popular search:
Batteryrecommended oilclutchBleedOil sensor plugwiper fluidair condition
Previous
Next
Load previous 8 pages

Page 233 of 2395

INFINITI QX4 2001 Factory Service Manual 3 CHECK LINE PRESSURE Check line pressure at idle with selector lever in ªRº position. Refer to ªLINE PRESSURE TESTº, AT-62. SAT494G OK or NG OK©GO TO 4. NG©1. Remove control valve assembly. Ref

Page 234 of 2395

INFINITI QX4 2001 Factory Service Manual 6 DETECT MALFUNCTIONING ITEM 1. Remove control valve assembly. Refer to ªON-VEHICLE SERVICEº, AT-273. 2. Check the following items: IValves to control line pressure (Pressure regulator valve, pressu

Page 235 of 2395

INFINITI QX4 2001 Factory Service Manual 7. Vehicle Does Not Creep Forward In ªDº, ª2º Or ª1º Position =NBAT0079SYMPTOM: Vehicle does not creep forward when selecting ªDº, ª2º or ª1º position. 1 CHECK A/T FLUID LEVEL Check A/T fl

Page 236 of 2395

INFINITI QX4 2001 Factory Service Manual 3 CHECK LINE PRESSURE Check line pressure at idle with selector lever in ªRº position. Refer to ªLINE PRESSURE TESTº, AT-62. SAT494G OK or NG OK©GO TO 4. NG©1. Remove control valve assembly. Ref

Page 237 of 2395

INFINITI QX4 2001 Factory Service Manual 6 DETECT MALFUNCTIONING ITEM 1. Remove control valve assembly. Refer to ªON-VEHICLE SERVICEº, AT-273. 2. Check the following items: IValves to control line pressure (Pressure regulator valve, pressu

Page 238 of 2395

INFINITI QX4 2001 Factory Service Manual 8. Vehicle Cannot Be Started From D1=NBAT0080SYMPTOM: Vehicle cannot be started from D 1on Cruise test Ð Part 1. 1 CHECK SYMPTOM Is ª6. Vehicle Does Not Creep Backward In ªRº Positionº OK? YesorN

Page 239 of 2395

INFINITI QX4 2001 Factory Service Manual 4 CHECK LINE PRESSURE Check line pressure at stall point with selector lever in ªDº position. Refer to ªLINE PRESSURE TESTº, AT-62. SAT494G OK or NG OK©GO TO 5. NG©GO TO 8. 5 CHECK A/T FLUID CON

Page 240 of 2395

INFINITI QX4 2001 Factory Service Manual 7 CHECK SYMPTOM Check again. OK or NG OK©INSPECTION END NG©1. Perform TCM input/output signal inspection. 2. If NG, recheck TCM pin terminals for damage or loose connection with harness con- nector.
Load next 8 pages
Page:   < prev 1-10 ... 201-208 209-216 217-224 225-232 233-240 241-248 249-256 257-264 265-272 ... 2400 next >
diagramheadlightsfuel pumprun flatspare tireadblue
Popular search:
Navigation removeservice scheduleweightbattery capacityBattery cables connectingalternator replaceaudio