Page 2281 of 2395
2 CHECK 4WD WARNING LAMP
Is 4WD warning lamp turned ON?
SMT958D
YesorNo
Ye s©1. Turn ignition switch to ªOFFº position.
2. Perform self-diagnosis.
Refer to ªTrouble Diagnosis without CONSULT-IIº, TF-27.
3. Go to ª2. CHECK AT IDLEº. Refer to TF-47.
No©Go to Symptom 2. Refer to TF-100.
TROUBLE DIAGNOSIS Ð BASIC INSPECTION
Road Test (Cont'd)
TF-46
Page 2282 of 2395
2. CHECK AT IDLE=NBTF0017S03
1 CHECK 4WD SHIFT INDICATOR LAMP
1. Park vehicle on flat surface.
2. Turn ignition switch to ªOFFº position.
3. Move A/T selector lever to ªPº or ªNº position.
4. Set 4WD shift switch to ª4Hº position.
5. Set 4WD shift switch to ª2WDº position.
6. Start engine.
7. Is 4WD shift indicator lamp turned OFF?
SMT958D
YesorNo
Ye s©Go to ªATP SWITCH, WAIT DETECTION SWITCH AND NEUTRAL-4LO SWITCHº. Refer
to TF-76.
No©GO TO 2.
2 CHECK 4WD WARNING LAMP
Is 4WD warning lamp turned OFF?
YesorNo
Ye s©GO TO 3.
No©Perform self-diagnosis. Refer to ªTrouble Diagnosis without CONSULT-IIº, TF-27.
GI
MA
EM
LC
EC
FE
AT
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
TROUBLE DIAGNOSIS Ð BASIC INSPECTION
Road Test (Cont'd)
TF-47
Page 2283 of 2395
3 CHECK 4WD SHIFT INDICATOR LAMP
1. Set 4WD shift switch to ª2WDº, ªAUTOº, ª4Hº, ª4LOº, ª4Hº and ª2WDº in order.
(Stay at each switch position for at least 1 second.)
2. Does 4WD shift indicator lamp change properly and does buzzer sound?
SMT851D
SMT971D
YesorNo
Ye s©GO TO 4.
No©Go to ª2-4WD SHIFT SOLENOID VALVE AND 4WD SHIFT SWITCHº. Refer to TF-66.
4 CHECK 4WD WARNING LAMP
Is 4WD warning lamp turned ON?
YesorNo
Ye s©Perform self-diagnosis. (Refer to ªTrouble Diagnosis without CONSULT-IIº, TF-27.)
No©GO TO 5.
TROUBLE DIAGNOSIS Ð BASIC INSPECTION
Road Test (Cont'd)
TF-48
Page 2284 of 2395
5 CHECK 4WD SHIFT INDICATOR LAMP
1. Move A/T selector lever to ªPº position.
2. Set 4WD shift switch from ª4Hº to ª4LOº.
SMT849D
3. While shifting from ª4Hº to ª4LOº, does 4WD shift indicator lamp turn OFF and ATP warning lamp turn ON?
SMT958D
YesorNo
Ye s©GO TO 6.
No©Go to Symptoms 3 and 4. Refer to TF-102.
GI
MA
EM
LC
EC
FE
AT
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
TROUBLE DIAGNOSIS Ð BASIC INSPECTION
Road Test (Cont'd)
TF-49
Page 2285 of 2395
6 CHECK 4WD SHIFT INDICATOR LAMP
Does 4WD shift indicator lamp indicate 4LO indicator lamp turn ON when 4WD shift switch is set in ª4LOº?
SMT849D
SMT770D
YesorNo
Ye s©GO TO 7.
No©Go to Symptom 5. Refer to TF-104.
7 CHECK 4WD SHIFT INDICATOR LAMP (*1)
1. Set 4WD shift switch from ª4LOº to ª4Hº.
2. Does 4LO indicator lamp flicker? (*1)
*1: While ªWaitº function is operating, 4LO indicator lamp flashes.
YesorNo
Ye s©Go to Symptom 6 and 7. Refer to TF-106 and TF-107.
No©Go to ª3. CRUISE TESTº. Refer to TF-51.
TROUBLE DIAGNOSIS Ð BASIC INSPECTION
Road Test (Cont'd)
TF-50
Page 2286 of 2395
3. CRUISE TEST=NBTF0017S04
1 INSPECTION START
SMT849D
SMT958D
WITH CONSULT-II©GO TO 2.
WITHOUT CONSULT-II©GO TO 3.
GI
MA
EM
LC
EC
FE
AT
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
TROUBLE DIAGNOSIS Ð BASIC INSPECTION
Road Test (Cont'd)
TF-51
Page 2287 of 2395

2 CHECK INPUT SIGNAL
With CONSULT-II
1. Warm up engine to normal operating temperature.
2. Park vehicle on flat surface.
3. Move A/T selector lever to ªPº position.
4. Set 4WD shift switch to ª4Hº position.
5. Set 4WD shift switch to ªAUTOº position.
6. Start engine.
7. Drive for at least 30 seconds at a speed higher than 20 km/h (12 MPH).
(Drive vehicle until ªFLUID TEMP SEº exceeds 0.9V.)
8. Park vehicle on flat surface.
9. Move A/T selector lever to ªPº position.
10. Set 4WD shift switch to ª2WDº position.
11. Leave vehicle for at least 80 seconds with ªFLUID TEMP SEº at 0.9V or less.
SMT972D
12. Is 4WD warning lamp turned ON?
YesorNo
Ye s©Perform self-diagnosis. Refer to ªTrouble Diagnosis with CONSULT-IIº, TF-30.
No©GO TO 4.
3 CHECK INPUT SIGNAL
Without CONSULT-II
1. Warm up engine to normal operating temperature.
2. Park vehicle on flat surface.
3. Move A/T selector lever to ªPº position.
4. Set 4WD shift switch to ª4Hº position.
5. Set 4WD shift switch to ªAUTOº position.
6. Start engine.
7. Drive vehicle for at least 30 seconds at a speed higher than 20 km/h (12 MPH).
8. Park vehicle on flat surface.
9. Move A/T selector lever to ªPº position.
10. Set 4WD shift switch to ª2WDº position.
11. Is 4WD warning lamp turned ON?
YesorNo
Ye s©Perform self-diagnosis. Refer to ªTrouble Diagnosis without CONSULT-IIº, TF-27.
No©GO TO 4.
4 (1) CHECK TIGHT CORNER BRAKING SYMPTOM
1. Set 4WD shift switch to ªAUTOº position.
2. Drive vehicle at speed lower than 20 km/h (12 MPH) with steering wheel fully turned.
3. Does tight corner braking symptom occur?
YesorNo
Ye s©GO TO 5.
No©GO TO 6.
TROUBLE DIAGNOSIS Ð BASIC INSPECTION
Road Test (Cont'd)
TF-52
Page 2288 of 2395
5 CONFIRM SYMPTOM AGAIN
Confirm symptom and self-diagnosis again.
Refer to ªTrouble Diagnosis without CONSULT-IIº, TF-27 and ªTrouble Diagnosis with CONSULT-IIº, TF-30.
OK or NG
OK©GO TO 6.
NG©Go to Symptoms 8 and 9. Refer to TF-108, 109.
6 (2) CHECK TIGHT CORNER BRAKING SYMPTOM
1. Set 4WD shift switch to ª4Hº position.
2. Drive vehicle at speed lower than 20 km/h (12 MPH) with steering wheel fully turned.
3. Does tight corner braking symptom occur?
YesorNo
Ye s©INSPECTION END
No©GO TO 7.
7 CONFIRM SYMPTOM AGAIN
Confirm symptom and self-diagnosis again.
Refer to ªTrouble Diagnosis without CONSULT-IIº, TF-27 and ªTrouble Diagnosis with CONSULT-IIº, TF-30.
OK or NG
OK©INSPECTION END
NG©Go to Symptoms 8 and 9. Refer to TF-108, 109.
GI
MA
EM
LC
EC
FE
AT
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
TROUBLE DIAGNOSIS Ð BASIC INSPECTION
Road Test (Cont'd)
TF-53