2001 INFINITI QX4 Factory Service Manual

turn signalwiring diagramTPMSfusealternatorchange key battery
Popular search:
brake padsfuel filter locationtransmissiongarage door openerair conditionerspare wheelradiator cap
Previous
Next
Load previous 8 pages

Page 225 of 2395

INFINITI QX4 2001 Factory Service Manual 8 CHECK TCM INSPECTION 1. Perform TCM input/output signal inspection. 2. If NG, recheck TCM pin terminals for damage or loose connection with harness connector. OK or NG OK©INSPECTION END NG©Repair

Page 226 of 2395

INFINITI QX4 2001 Factory Service Manual 2. Engine Cannot Be Started In ªPº and ªNº Position =NBAT0074SYMPTOM: Engine cannot be started with selector lever in ªPº or ªNº position. Engine cannot be started with selector lever in ªPº

Page 227 of 2395

INFINITI QX4 2001 Factory Service Manual 3. In ªPº Position, Vehicle Moves Forward Or Backward When Pushed =NBAT0075SYMPTOM: Vehicle moves when it is pushed forward or backward with selector lever in ªPº position. 1 CHECK PARKING COMPONE

Page 228 of 2395

INFINITI QX4 2001 Factory Service Manual 4. In ªNº Position, Vehicle Moves=NBAT0076SYMPTOM: Vehicle moves forward or backward when selecting ªNº posi- tion. 1 CHECK PNP SWITCH CIRCUIT With CONSULT-II Does ªTCM INPUT SIGNALSº in Data Mo

Page 229 of 2395

INFINITI QX4 2001 Factory Service Manual 3 CHECK A/T FLUID LEVEL Check A/T fluid level again. SAT638A OK or NG OK©GO TO 4. NG©Refill ATF. 4 CHECK A/T FLUID CONDITION 1. Remove oil pan. 2. Check A/T fluid condition. SAT171B OK or NG OK©GO

Page 230 of 2395

INFINITI QX4 2001 Factory Service Manual 5. Large Shock. ªNº®ªRº Position=NBAT0077SYMPTOM: There is large shock when changing from ªNº to ªRº position. 1 CHECK SELF-DIAGNOSTIC RESULTS Does self-diagnosis show damage to A/T fluid tem

Page 231 of 2395

INFINITI QX4 2001 Factory Service Manual 3 CHECK LINE PRESSURE Check line pressure at idle with selector lever in ªDº position. Refer to ªLINE PRESSURE TESTº, AT-62. SAT494G OK or NG OK©GO TO 4. NG©1. Remove control valve assembly. Ref

Page 232 of 2395

INFINITI QX4 2001 Factory Service Manual 6. Vehicle Does Not Creep Backward In ªRº Position =NBAT0078SYMPTOM: Vehicle does not creep backward when selecting ªRº position. 1 CHECK A/T FLUID LEVEL Check A/T fluid level again. SAT638A OK or
Load next 8 pages
Page:   < prev 1-10 ... 193-200 201-208 209-216 217-224 225-232 233-240 241-248 249-256 257-264 ... 2400 next >
airbagenginecoolantinstrument panelfuse box locationaudio
Popular search:
steeringtire pressure resetBleedhood opendriver seat adjustmentdead batteryoctane