Page 105 of 4171
SLIDING MOTORADP-91
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
1. Disconnect driver seat control unit and sliding motor LH.
2. Check continuity between driver seat control unit harness con-
nector and sliding motor LH harness connector.
3. Check continuity between driver seat control unit harness con-
nector and ground.
Is the inspection result normal?
YES >> GO TO 3
NO >> Repair or replace harness.
3. CHECK INTERMITTENT INCIDENT
Refer to GI-38, "Intermittent Incident"
.
Is the inspection result normal?
YES >> Replace driver seat control unit. Refer to ADP-165, "Removal and Installation".
NO >> Repair or replace the malfunctioning part.
Driver seat control
unit connector Te r m i n a l
Sliding motor LH
connector Terminal Continuity
B203 (A) 35
B204 (B) 5
Ye s
42 1
Driver seat control unit connector Terminal
GroundContinuity
B203 (A) 35
No
42
ALJIA0321ZZ
Revision: December 20092009 QX56
Page 106 of 4171

ADP-92
< COMPONENT DIAGNOSIS >
RECLINING MOTOR
RECLINING MOTOR
DescriptionINFOID:0000000003775624
The reclining motor LH is installed to the seatback assembly.
The reclining motor LH is activated with the driver seat control unit.
The seatback is reclined forward/backward by changing the rotation direction of reclining motor LH.
Component Function CheckINFOID:0000000003775625
1. CHECK FUNCTION
1. Select “SEAT RECLINING” in “A ctive test” mode with CONSULT-III.
2. Check the reclining motor LH operation.
Is the operation of relevant parts normal?
YES >> Inspection End.
NO >> Perform diagnosis procedure. Refer to ADP-92, "Diagnosis Procedure"
.
Diagnosis ProcedureINFOID:0000000003775626
1. CHECK RECLINING MOTOR LH POWER SUPPLY
1. Turn the ignition switch OFF.
2. Perform “Active test” (“SEA T RECLINING”) with CONSULT-lll
3. Check voltage between driver seat control unit harness connec- tor and ground.
Is the inspection result normal?
YES >> Replace reclining motor LH. (Built in seatback assembly). Refer to SE-68, "Disassembly and
Assembly".
NO >> GO TO 2
2. CHECK RECLINING MOTOR LH CIRCUIT
Test Item Description
SEAT RECLINING OFF
Seat reclining Sto p
FR Forward
RR Backward
Te r m i n a l
Te s t I t e mVoltage (V)
(Approx.)
(+)
(-)
Driver
seat con- trol unit
connector Te r m i n a l
B203 36
Ground SEAT RE-
CLINING OFF 0
FR (forward) Battery voltage
RR (backward) 0
44 OFF 0
FR (forward) 0
RR (backward) Battery voltage
PIIA4802E
Revision: December 20092009 QX56
Page 107 of 4171
RECLINING MOTORADP-93
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
1. Disconnect driver seat control unit and reclining motor LH.
2. Check continuity between driver seat control unit harness con-
nector and reclining motor harness connector.
3. Check continuity between driver seat control unit harness con-
nector and ground.
Is the inspection result normal?
YES >> GO TO 3
NO >> Repair or replace harness.
3. CHECK INTERMITTENT INCIDENT
Refer to GI-38, "Intermittent Incident"
.
Is the inspection result normal?
YES >> Replace driver seat control unit. Refer to ADP-165, "Removal and Installation".
NO >> Repair or replace the malfunctioning part.
Driver seat control
unit connector Te r m i n a l
Reclining motor LH
connector Terminal Continuity
B203 (A) 36
B205 (B) 4
Ye s
44 3
Driver seat control unit connector Te r m i n a l
Ground Continuity
B203 (A) 36
No
44
ALJIA0322ZZ
Revision: December 20092009 QX56
Page 108 of 4171

ADP-94
< COMPONENT DIAGNOSIS >
LIFTING MOTOR (FRONT)
LIFTING MOTOR (FRONT)
DescriptionINFOID:0000000003775627
The lifting motor (front) is installed to the power seat frame assembly.
The lifting motor (front) is activated with the driver seat control unit.
The lifter (front) is moved upward/downward by changing the rotation direction of lifting motor (front).
Component Function CheckINFOID:0000000003775628
1. CHECK FUNCTION
1. Select “SEAT LIFTER FR” in “Active test” mode with CONSULT-III.
2. Check the lifting motor (front) operation.
Is the operation of relevant parts normal?
YES >> Inspection End.
NO >> Perform diagnosis procedure. Refer to ADP-94, "Diagnosis Procedure"
.
Diagnosis ProcedureINFOID:0000000003775629
1. CHECK LIFTING MOTOR (FRONT) POWER SUPPLY
1. Turn the ignition switch OFF.
2. Perform “Active test” (“SEAT LIFTER FR”) with CONSULT-lll.
3. Check voltage between driver seat control unit harness connec- tor and ground.
Is the inspection result normal?
YES >> Replace lifting motor (front). (Built in power seat frame assembly). Refer to SE-68, "Disassembly
and Assembly".
NO >> GO TO 2
2. CHECK LIFTING MO TOR (FRONT) CIRCUIT
Test Item Description
SEAT LIFTER FR OFF
Seat lifting (front) Sto p
UP Upward
DWN Downward
Te r m i n a l
Test ItemVoltage (V)
(Approx.)
(+)
(-)
Driver seat
control unit connector Te r m i n a l
B203 37
Ground SEAT
LIFTER
FR OFF 0
UP 0
DWN (down) Battery voltage
45 OFF 0
UP Battery voltage
DWN (down) 0
PIIA4805E
Revision: December 20092009 QX56
Page 109 of 4171
LIFTING MOTOR (FRONT)ADP-95
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
1. Disconnect driver seat control unit and lifting motor (front).
2. Check continuity between driver seat control unit harness con-
nector and lifting motor (front) harness connector.
3. Check continuity between driver seat control unit harness con-
nector and ground.
Is the inspection result normal?
YES >> GO TO 3
NO >> Repair or replace harness.
3. CHECK INTERMITTENT INCIDENT
Refer to GI-38, "Intermittent Incident"
.
Is the inspection result normal?
YES >> Replace driver seat control unit. Refer to ADP-165, "Removal and Installation".
NO >> Repair or replace the malfunctioning part.
Driver seat control
unit connector Te r m i n a l
Lifting motor (front)
connector Terminal Continuity
B203 (A) 37
B206 (B) 1
Ye s
45 5
Driver seat control unit connector Te r m i n a l
GroundContinuity
B203 (A) 37
No
45
ALJIA0323ZZ
Revision: December 20092009 QX56
Page 110 of 4171

ADP-96
< COMPONENT DIAGNOSIS >
LIFTING MOTOR (REAR)
LIFTING MOTOR (REAR)
DescriptionINFOID:0000000003775630
The lifting motor (rear) is installed to the power seat frame assembly.
The lifting motor (rear) is activated with the driver seat control unit.
The seat lifter (rear) is moved upward/downward by changing the rotation direction of lifting motor (rear).
Component Function CheckINFOID:0000000003775631
1. CHECK FUNCTION
1. Select “SEAT LIFTER RR” in “A ctive test” mode with CONSULT-III.
2. Check the lifting motor (rear) operation.
Is the operation of relevant parts normal?
YES >> Inspection End.
NO >> Perform diagnosis procedure. Refer to ADP-96, "Diagnosis Procedure"
.
Diagnosis ProcedureINFOID:0000000003775632
1. CHECK LIFTING MOTOR (REAR) POWER SUPPLY
1. Turn the ignition switch OFF.
2. Perform “Active test” (“SEAT LIFTER RR”) with CONSULT-lll
3. Check voltage between driver seat control unit harness connec- tor and ground.
Is the inspection result normal?
YES >> Replace lifting motor (rear). (Built in power seat frame assembly). Refer to SE-68, "Disassembly
and Assembly".
NO >> GO TO 2
2. CHECK LIFTING MO TOR (REAR) CIRCUIT
Test Item Description
SEAT LIFTER RR OFF
Seat lifting (rear) Sto p
UP Upward
DWN Downward
Te r m i n a l
Test ItemVoltage (V)
(Approx.)
(+)
(-)
Driver seat
control unit connector Te r m i n a l
B203 38
Ground SEAT
LIFTER
RROFF 0
UP Battery voltage
DWN (down) 0
39 OFF 0
UP 0
DWN (down) Battery voltage
PIIA4804E
Revision: December 20092009 QX56
Page 111 of 4171
LIFTING MOTOR (REAR)ADP-97
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
1. Disconnect driver seat control unit and lifting motor (rear).
2. Check continuity between driver seat control unit harness con-
nector and lifting motor (rear) harness connector.
3. Check continuity between driver seat control unit harness con-
nector and ground.
Is the inspection result normal?
YES >> GO TO 3
NO >> Repair or replace harness.
3. CHECK INTERMITTENT INCIDENT
Refer to GI-38, "Intermittent Incident"
.
Is the inspection result normal?
YES >> Replace driver seat control unit. Refer to ADP-165, "Removal and Installation".
NO >> Repair or replace the malfunctioning part.
Driver seat control
unit connector Te r m i n a l
Lifting motor (rear)
connector Terminal Continuity
B203 (A) 38
B207 (B) 5
Ye s
39 1
Driver seat control unit connector Te r m i n a l
GroundContinuity
B203 (A) 38
No
39
ALJIA0324ZZ
Revision: December 20092009 QX56
Page 112 of 4171

ADP-98
< COMPONENT DIAGNOSIS >
TILT MOTOR
TILT MOTOR
DescriptionINFOID:0000000003775633
The tilt motor is installed to the steering column assembly.
The tilt motor is activated with the automatic drive positioner control unit.
The steering column is tilted upward/downward by changing the rotation direction of tilt motor.
Component Function CheckINFOID:0000000003775634
1. CHECK FUNCTION
1. Select “TILT MOTOR” in “Act ive test” mode with CONSULT-III.
2. Check the tilt motor operation.
Is the operation of relevant parts normal?
YES >> Inspection End.
NO >> Perform diagnosis procedure. Refer to ADP-98, "Diagnosis Procedure"
.
Diagnosis ProcedureINFOID:0000000003775635
1. CHECK TILT MOTOR HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect automatic drive positioner control unit and tilt motor assembly.
3. Check continuity between automat ic drive positioner control unit
connector M34 (A) terminals 35, 42 and tilt motor assembly con-
nector M86 (B) terminals 1, 5.
4. Check continuity between automat ic drive positioner control unit
connector M34 (A) terminals 35, 42 and ground.
Is the inspection result normal?
YES >> GO TO 2
NO >> Repair or replace harness.
2. CHECK AUTOMATIC DRIVE POSITIONER CONTROL UNIT OUTPUT SIGNAL
1. Connect the automatic drive posit ioner control unit and tilt motor
assembly.
2. Check voltage between automatic drive positioner control unit connector and ground.
Test item Description
TILT MOTOR OFF
Steering tilt Sto p
UP Upward
DWN Downward
35 - 1 : Continuity should exist.
42 - 5 : Continuity should exist.
35 - Ground : Continuity should not exist.
42 - Ground : Continuity should not exist.
ALJIA0293ZZ
LIIA0482E
Revision: December 20092009 QX56