2009 INFINITI QX56 Factory Service Manual

Page 81 of 4171

INFINITI QX56 2009  Factory Service Manual 
DOOR MIRROR REMOTE CONTROL SWITCHADP-67
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
1. Turn ignition switch OFF.
2. Disconnect automatic drive positioner control unit and door mir- ror r

Page 82 of 4171

INFINITI QX56 2009  Factory Service Manual 
ADP-68
< COMPONENT DIAGNOSIS >
DOOR MIRROR REMOTE CONTROL SWITCH
YES >> GO TO 5
NO >> Replace automatic drive posit ioner control unit. Refer to ADP-166, "Removal and Installation"
.
5. CHECK MIRROR

Page 83 of 4171

INFINITI QX56 2009  Factory Service Manual 
POWER SEAT SWITCH GROUND CIRCUITADP-69
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
POWER SEAT SWITCH GROUND CIRCUIT
Diagnosis ProcedureINFOID:0000000003775589
1. CHECK POWER SEAT SWITCH

Page 84 of 4171

INFINITI QX56 2009  Factory Service Manual 
ADP-70
< COMPONENT DIAGNOSIS >
DETENTION SWITCH
DETENTION SWITCH
DescriptionINFOID:0000000003775590
Park position switch is installed on A/T shift selector. It is turned OFF when the A/T selector lev

Page 85 of 4171

INFINITI QX56 2009  Factory Service Manual 
DETENTION SWITCHADP-71
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
1. Turn ignition switch OFF.
2. Disconnect driver seat control unit and A/T shift selector.
3. Check continuity between

Page 86 of 4171

INFINITI QX56 2009  Factory Service Manual 
ADP-72
< COMPONENT DIAGNOSIS >
FRONT DOOR SWITCH (DRIVER SIDE)
FRONT DOOR SWITCH (DRIVER SIDE)
DescriptionINFOID:0000000003775593
Detects front door LH open/close condition.
Component Function CheckI

Page 87 of 4171

INFINITI QX56 2009  Factory Service Manual 
FRONT DOOR SWITCH (DRIVER SIDE)ADP-73
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
1. Turn ignition switch OFF.
2. Disconnect front door switch LH.
3. Check continuity between front door

Page 88 of 4171

INFINITI QX56 2009  Factory Service Manual 
ADP-74
< COMPONENT DIAGNOSIS >
SLIDING SENSOR
SLIDING SENSOR
DescriptionINFOID:0000000003775597
 The sliding sensor is installed to the power seat frame assembly.
 The pulse signal is input to the