2004 NISSAN TERRANO Service Repair Manual

Removal and Installation
IWhen removing or installing back door, place a cloth or other padding on back door. This prevents vehicle
body from being scratched.
I Bumper fascia is made of plastic. Do not use excessive force and be sure to keep oil away from it.
I Back door adjustment: Adjust at hinge-back door portion for proper back door fit.
I Back door lock system adjustment: Adjust striker so that it is in the center of the lock. After adjustment,
check back door lock operation.
I After installation, make sure that back door and fuel filler lid open smoothly.
REAR BUMPER ASSEMBLY
YBT117
BODY REAR END AND OPENER
BT-8
http://vnx.su/

YBT118
BODY REAR END AND OPENER
Removal and Installation (Cont'd)BT-9
http://vnx.su/

Removal and Installation
FRONT DOOR
IFor removal of front door finisher, refer to ªDOOR TRIMº,
BT-19.
I Remove sealing screen.
I After adjusting door or door lock, check door lock operation.
YBT119
DOOR
BT-10
http://vnx.su/

YBT120
DOOR
Removal and Installation (Cont'd)BT-11
http://vnx.su/

REAR DOOR
Wagon
IFor removal of rear door finisher, refer to ªDOOR TRIMº, BT-19.
I Remove sealing screen.
I After adjusting door or door lock, make sure door lock properly.
YBT125
DOOR
Removal and Installation (Cont'd)
BT-12
http://vnx.su/

YBT121
DOOR
Removal and Installation (Cont'd)BT-13
http://vnx.su/

IAfter adjusting door or door lock, make sure door locks prop-
erly.
BACK DOOR
YBT122
DOOR
Removal and Installation (Cont'd)
BT-14
http://vnx.su/

YBT123
DOOR
Removal and Installation (Cont'd)BT-15
http://vnx.su/