Page 1305 of 1833
![NISSAN TERRANO 2004 Service Repair Manual HOW TO ERASE SELF-DIAGNOSIS RESULTS
With CONSULT-II
IªSELF-DIAG [CURRENT]º
A current self-diagnosis result is displayed on the CONSULT-II screen in real time.
After the malfunction is repaired compl NISSAN TERRANO 2004 Service Repair Manual HOW TO ERASE SELF-DIAGNOSIS RESULTS
With CONSULT-II
IªSELF-DIAG [CURRENT]º
A current self-diagnosis result is displayed on the CONSULT-II screen in real time.
After the malfunction is repaired compl](/manual-img/5/57394/w960_57394-1304.png)
HOW TO ERASE SELF-DIAGNOSIS RESULTS
With CONSULT-II
IªSELF-DIAG [CURRENT]º
A current self-diagnosis result is displayed on the CONSULT-II screen in real time.
After the malfunction is repaired completely, no malfunction is detected on ªSELF-DIAG [CURRENT]º.
I ªSELF-DIAG [PAST]º
Return to the ªSELF-DIAG [CURRENT]º CONSULT-II screen by pushing ªBACKº key of CONSULT-II and
select ªSELF-DIAG [CURRENT]º in SELECT DIAG MODE. Touch ªERASEº in ªSELF-DIAG [CURRENT]º
mode.
NOTE:
If the memory of the malfunction in ªSELF-DIAG [PAST]º is not erased, the User mode shows the sys-
tem malfunction by the operation of the warning lamp even if the malfunction is repaired completely.
I ªTROUBLE DIAG RECORDº
The memory of ªTROUBLE DIAG RECORDº cannot be erased.
Without CONSULT-II
After a malfunction is repaired, switch the ignition ªOFFº for at least one second, then back ªONº. Diagnosis
mode returns to the User mode. At that time, the self-diagnostic result is cleared.
SRS701
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Trouble Diagnoses Introduction (Cont'd)
RS-30
http://vnx.su/
Page 1306 of 1833
How to Perform Trouble Diagnoses for Quick
and Accurate Repair
A good understanding of the malfunction conditions can make troubleshooting faster and more accurate.
In general, each customer feels differently about a malfunction. It is important to fully understand the symp-
toms or conditions for a customer complaint.
INFORMATION FROM CUSTOMER
WHAT ..... Vehicle model
WHEN ..... Date, Frequencies
WHERE ..... Road conditions
HOW ..... Operating conditions, Symptoms
PRELIMINARY CHECK
Check that the following parts are in good order.
IBattery [Refer to SC-3, ªBATTERYº.]
I Fuse [Refer to EL-12, ªFuseº, ªPOWER SUPPLY ROUTINGº.]
I System component-to-harness connections
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
RS-31
http://vnx.su/
Page 1307 of 1833
WORK FLOW
NOTE:
Seat belt pre-tensioner malfunction is indicated by ªAIR BAGº warning lamp.
*1: RS-31
*2: RS-38*3: RS-39
*4: RS-48*5: RS-42
*6: RS-53
SRS799
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
How to Perform Trouble Diagnoses for Quick
and Accurate Repair (Cont'd)
RS-32
http://vnx.su/
Page 1308 of 1833
Schematic
YRS064
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
RS-33
http://vnx.su/
Page 1309 of 1833
Wiring Diagram Ð SRS Ð
YRS119
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
RS-34
http://vnx.su/
Page 1310 of 1833
YRS066
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Wiring Diagram Ð SRS Ð (Cont'd)RS-35
http://vnx.su/
Page 1311 of 1833
MODELS WITH FRONT SEAT BELT PRE-TENSIONER B52, B53
YRS120
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Wiring Diagram Ð SRS Ð (Cont'd)RS-36
http://vnx.su/
Page 1312 of 1833
YRS121
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Wiring Diagram Ð SRS Ð (Cont'd)RS-37
http://vnx.su/