2002 ISUZU AXIOM Service Repair Manual

Page 1777 of 2100

ISUZU AXIOM 2002  Service Repair Manual LIGHTING SYSTEM8A±1
AXIOM
BODY AND ACCESSORIES
CONTENTS
Lighting System 8A. . . . . . . . . . . . . . . . . . . . . . . . . 
Wiper / Washer System 8B. . . . . . . . . . . . . . . . . . 
Entertainment

Page 1778 of 2100

ISUZU AXIOM 2002  Service Repair Manual 8A±2LIGHTING SYSTEM
Removal and Installation 8A±17. . . . . . . . . . . . . . . 
Dimmer´Passing Switch
 (Combination Switch) 8A±17. . . . . . . . . . . . . . . . . . . 
Removal and Installation 8A

Page 1779 of 2100

ISUZU AXIOM 2002  Service Repair Manual LIGHTING SYSTEM8A±3
Headlight Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the headlight bulb.
Disconnect the connector (2).
Remove the socket (1) by turning it
counterclockwise.

Page 1780 of 2100

ISUZU AXIOM 2002  Service Repair Manual 8A±4LIGHTING SYSTEM
Headlight Assembly
Removal
1. Disconnect the battery ground cable.
2. Remove the front combination light (2).
Remove the screw.
Disconnect the connector.
3. Remove the headlight

Page 1781 of 2100

ISUZU AXIOM 2002  Service Repair Manual LIGHTING SYSTEM8A±5
6. Turn the headlight low beam on.
7. Adjust the CUTLINE 30 mm (1.18 in) below the
horizontal line (H).
801R200011
Vertical Adjustment
Use a screwdriver for vertical adjustment.
8

Page 1782 of 2100

ISUZU AXIOM 2002  Service Repair Manual 8A±6LIGHTING SYSTEM
Side Marker Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the front combination light (1).
Remove the screw.
3. Remove the bulb (2).
Remove the side marke

Page 1783 of 2100

ISUZU AXIOM 2002  Service Repair Manual LIGHTING SYSTEM8A±7
Taillight Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the rear combination light assembly (1).
Remove two screws.
Pull out the rear combination light assembly

Page 1784 of 2100

ISUZU AXIOM 2002  Service Repair Manual 8A±8LIGHTING SYSTEM
License Plate Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the license plate light garnish.
Remove the three screws.
3. Remove the lens cover (3).
Remove