Page 305 of 1807
BO0R9-01
N09281Seal Packing
N11800Butyl Tape
- BODYSPORT ROOF
BO-49
2129 Author: Date:
1997 SUPRA (RM502U)
REASSEMBLY
1. INSTALL THESE PARTS:
(a) Bracket No.2
(b) Removable roof lock
(c) Roof headlining
(d) Removable roof moulding
2. APPLY SEAL PACKING
Apply seal packing on the removable roof moulding as shown
in the illustration.
L: 4 mm (0.16 in.)
Part No. 08826-00080 or equivalent
3. INSTALL ROOF SIDE RAIL WEATHERSTRIP
Page 306 of 1807
BO0RA-01
H01986
Steering Column Cover
Combination Switch
No.2 Cover
No.3 Cover
Steering Wheel
Heater to Register No.2 DuctSteering Wheel Pad
Front Pillar Garnish RH
Assist Grip Finish Lower
LH Panel
Finish PanelFront Door Scuff
Inside Plate RH
Foot RestParking Brake Lever
Ash Receptacle Box
Console Upper Panel
Front Door Scuff
Inside Plate LH
Parking Brake
Hole CoverConsole Box
Console Box Mounting No.4 Bracket
GG
C
C
JI
I
I
II BO-50
- BODYINSTRUMENT PANEL
2130 Author: Date:
1997 SUPRA (RM502U)
INSTRUMENT PANEL
COMPONENTS
Page 307 of 1807
N19395
Instrument Panel Side No.3 Bracket
Instrument Panel
Reinforcement
AAAA
A N
LL
LLL A
Instrument Panel No.1 Brace
Steering
ColumnFinish Panel Mounting
No.5 Bracket
Instrument Panel Lower Mounting
No.1 Bracket
Instrument Panel
Side Defroster
No.2 Nozzle
Front Passenger
Assembly M
D
FF
FF
F
F
Instrument Panel Mounting
No.1 Bracket Instrument Panel
Lower Mounting
No.1 Bracket
Glove Box LampB
E B
E
Glove Compartment
Door Finish Plate
Instrument Panel
Box Finish Panel Mounting
No.4 Bracket Finish Panel
Mounting
No.3 BracketD
J
CJ
CD
Cluster Finish Panel
JJJJJ
Combination
Meter
Audio Receiver
Assembly
Cluster Finish
Center Panel
Cluster Finish Panel LHComputer Cover
Cluster Finish Panel RH
Key Cylinder Lamp H
J HH
H JF
25 (260, 19)
N´m (kgf´cm, ft´lbf): Specified torque
- BODYINSTRUMENT PANEL
BO-51
2131 Author: Date:
1997 SUPRA (RM502U)
Page 308 of 1807
N11812
No.1 Pin
Defroster Nozzle No.1 Garnish
Defroster Nozzle
Defroster Lower Nozzle
Heater to Register No.3 Duct
Instrument Panel Wire Harness KKKKKK
K
Solar Sensor
Room Temperature Sensor
Heater to Register No.4 DuctJ
Tweeter Speaker RH K
K
K
K
K
KK Tweeter Speaker LH
Side Defroster
No.1 Nozzle
Heater to Register
No.1 DuctNo.3 Register
Instrument Panel
Heater to Register No.5 Duct
No.4 Register
Theft Deterrent and
Door Lock ECU
PPS ECU K BO-52
- BODYINSTRUMENT PANEL
2132 Author: Date:
1997 SUPRA (RM502U)
Page 309 of 1807
V05739
Shape Size
ShapeSize
Shape
Sizemm (in.)
A
D
BC
EF
GHI
JKL
MN
ù = 8
(0.31)
L = 20
(0.79)ù = 8
(0.31)
L = 18
(0.71)ù = 6
(0.24)
L = 25
(0.98)
ù = 6
(0.24)
L = 23
(0.91)ù = 6
(0.24)
L = 22
(0.87)ù = 6
(0.24)
L = 20
(0.79)
ù = 6
(0.24)
L = 16
(0.63)ù = 5
(0.20)
L = 12
(0.47)ù = 5
(0.20)
L = 18
(0.71)
ù = 5.22
(0.2055)
L = 16
(0.63)ù = 5
(0.20)
L = 14
(0.55)ù = 8
(0.31)
ù = 6
(0.24)ù = 8
(0.31)
L = 25
(0.98)
- BODYINSTRUMENT PANEL
BO-53
2133 Author: Date:
1997 SUPRA (RM502U)
Page 310 of 1807
BO0RB-01
N08458
: 5 Clips
N087123 Clips
N117963 Clips
N08460
BO-54
- BODYINSTRUMENT PANEL
2134 Author: Date:
1997 SUPRA (RM502U)
REMOVAL
1. REMOVE STEERING WHEEL
(See page SR-1 1)
CAUTION:
When storing the wheel pad, keep the upper surface
of the pad facing upward.
Never disassemble the steering wheel pad.
2. REMOVE THESE PARTS:
HINT:
Tape a screwdriver tip before use.
(a) Front pillar garnishes
(b) Assist grip
(c) Foot rest
(d) Front door scuff inside plates
(e) Steering column cover
(f) Console upper panel
(g) Parking brake hole cover
(h) Console box
(i) Finish panel
(j) Finish lower LH panel
(k) Cluster finish panel
Page 311 of 1807
N084614 Clips
N084624 Clips
N162798 Clips
R06995
N084641 Clip
- BODYINSTRUMENT PANEL
BO-55
2135 Author: Date:
1997 SUPRA (RM502U)
(l) Cluster finish center panel
(m) Cluster finish panel LH
(n) Cluster finish panel RH
(o) Combination meter
(p) Heater to register No.2 duct
(q) Combination switch
(r) Audio receiver assembly
(s) Computer cover
3. REMOVE INSTRUMENT PANEL BOX
(a) Remove the glove compartment door finish plate inside
the instrument panel box.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
(b) Pull up and disconnect the airbag connector.
(c) Remove the instrument panel box.
4. REMOVE THESE PARTS:
(a) Finish panel mounting No.3 and No.4 brackets
(b) Heater to register No.4 duct
(c) Finish panel mounting No.5 bracket
Page 312 of 1807

H01987
N08465
N09351
N11635
BO-56
- BODYINSTRUMENT PANEL
2136 Author: Date:
1997 SUPRA (RM502U)
5. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
(a) Remove the 2 bolts from instrument panel.
Torque: 8.5 N´m (87 kgf´cm, 75 in.´lbf)
(b) Remove the 2 bolts from instrument panel reinforcement.
Torque: 20 N´m (204 kgf´cm, 15 ft´lbf)
(c) Remove the front passenger airbag assembly.
CAUTION:
Do not store the front passenger airbag assembly
with the airbag door facing down.
Never disassemble the front passenger airbag as-
sembly.
NOTICE:
At the time of installation, please refer to the following
items.
Make sure the front passenger airbag assembly is
installed to the specified torque.
Take care that the wirings do not interfere with other
parts and not pinched between other parts.
6. REMOVE THESE PARTS:
(a) Parking brake lever (2 bolts)
Torque: 59 N´m (600 kgf´cm, 43 ft´lbf)
(b) Side defroster No.2 nozzle
(c) Steering column (4 nuts)
Torque: 25 N´m (260 kgf´cm, 19 ft´lbf)
7. REMOVE INSTRUMENT PANEL
(a) Disconnect the connectors.
(b) Remove the nut, screw, 8 bolts and instrument panel.
Torque: 8.8 N´m (90 kgf´cm, 78 ft´lbf)
8. REMOVE INSTRUMENT PANEL REINFORCEMENT
(a) Remove the bolt, 2 nuts and instrument panel No.1 brace.
Torque: 21 N´m (210 kgf´cm, 15 ft´lbf)
(b) Remove the 6 bolts, 4 nuts and instrument panel rein-
forcement.
(c) Remove the bolt, 2 nuts and instrument panel side No.3
bracket.