Page 361 of 1807
BR-74
- BRAKEABS ACTUATOR (2JZ-GTE)
1874 Author: Date:
1997 SUPRA (RM502U)
(c) Similarly, inspect the ºREAR RHº and ºFRONT RHº wheel.
HINT:
When inspecting the ºFRONT RHº wheel, push the FRONT LH
switch instead of the MAIN push switch. This makes it possible
to inspect wherever the selector switch position indicates.
6. PUSH MOTOR SWITCH
(a) Push and hold in the MOTOR switch for a few seconds.
(b) Stop the engine.
7. DISCONNECT ACTUATOR CHECKER (SST) FROM
ACTUATOR
(a) Disconnect the actuator checker (SST) and sub-wire har-
nesses (SST) from the actuator.
SST 09990-00150, 09990-00250, 09990-00300,
09990-00360, 09990-00410
(b) Connect the 2 actuator connectors.
(c) Clear the DTC (See page DI-442).
Page 362 of 1807
BR1AY-01
W02804
- BRAKEABS ACTUATOR (2JZ-GTE)
BR-75
1875 Author: Date:
1997 SUPRA (RM502U)
COMPONENTS
Page 363 of 1807
W02805
BR-76
- BRAKEABS ACTUATOR (2JZ-GTE)
1876 Author: Date:
1997 SUPRA (RM502U)
Page 364 of 1807
BR0HV-02
W02793
SST
- BRAKEABS ACTUATOR (2JZ-GTE)
BR-77
1877 Author: Date:
1997 SUPRA (RM502U)
REMOVAL
1. REMOVE CRUISE CONTROL ACTUATOR
(a) Disconnect the connector from the cruise control actua-
tor.
(b) Remove the 3 bolts and cruise control actuator.
Torque: 19 N´m (195 kgf´cm, 14 ft´lbf)
2. DISCONNECT BRAKE LINES
Using SST, disconnect the 6 brake lines from the ABS actuator.
SST 09023-00100
Torque: 15 N´m (155 kgf´cm, 11 ft´lbf)
3. DISCONNECT CONNECTORS
Disconnect the 2 connectors and wire harness clamp from the
bracket.
4. REMOVE ABS ACTUATOR ASSEMBLY
Remove the bolt, 2 nuts and ABS actuator assembly.
Torque: 19 N´m (195 kgf´cm, 14 ft´lbf)
5. REMOVE ABS ACTUATOR
(a) Remove the 2 nuts and actuator from bracket.
Torque: 5.4 N´m (55 kgf´cm, 48 in.´lbf)
(b) Remove the 2 cushion bolts and 3 cushions.
Page 365 of 1807
BR0HX-02
R15984
Grease Cap
Front Speed Sensor RotorFront Speed Sensor
O-ring
Front Fender Splash Shield
Non-reusable part
- BRAKEFRONT SPEED SENSOR
BR-79
1879 Author: Date:
1997 SUPRA (RM502U)
FRONT SPEED SENSOR
COMPONENTS
Page 366 of 1807
BR0HY-01
R07259
R07261
BR-80
- BRAKEFRONT SPEED SENSOR
1880 Author: Date:
1997 SUPRA (RM502U)
REMOVAL
1. DISCONNECT CONNECTOR
(a) Remove the front fender splash shield.
(b) Disconnect the speed sensor connector.
2. REMOVE SPEED SENSOR
(a) Remove the 3 clamp bolts holding the sensor harness to
the body and upper suspension arm.
Torque: 5.4 N´m (55 kgf´cm, 48 in.´lbf)
(b) Remove the speed sensor from the steering knuckle.
Torque: 7.8 N´m (80 kgf´cm, 69 in.´lbf)
(c) Remove the O-ring from the speed sensor.
Page 367 of 1807
BR0I0-02
W02669
Rear Speed Sensor
Rear Speed Sensor Rotor BR-82
- BRAKEREAR SPEED SENSOR
1882 Author: Date:
1997 SUPRA (RM502U)
REAR SPEED SENSOR
COMPONENTS
Page 368 of 1807
BR0I1-01
R07264
R05712
- BRAKEREAR SPEED SENSOR
BR-83
1883 Author: Date:
1997 SUPRA (RM502U)
REMOVAL
1. DISCONNECT SPEED SENSOR CONNECTOR
(a) Remove the rear seat cushion and seatback.
(b) Remove the quarter trim panel.
(c) Disconnect the speed sensor connector, and pull out the
sensor wire harness with the grommet.
2. REMOVE SPEED SENSOR
(a) Remove the nut holding the sensor wire harness to the
body.
Torque: 5.4 N´m (55 kgf´cm, 48 in.´lbf)
(b) Remove the clamp from the upper arm.
(c) Remove the speed sensor from the axle carrier.
Torque: 7.8 N´m (80 kgf´cm, 69 in.´lbf)