SA0P5-01
W02903
R11082
SST
R11098
90° SA-26
- SUSPENSION AND AXLEFRONT SHOCK ABSORBER
1716 Author: Date:
1997 SUPRA (RM502U)
REASSEMBLY
1. INSTALL INSULATOR TO SUSPENSION SUPPORT
HINT:
Match the bolt of the suspension support with the cut-out part
of the insulator.
2. INSTALL COIL SPRING TO SHOCK ABSORBER
(a) Using SST, compress the coil spring.
SST 09727-30021
NOTICE:
Do not use an impact wrench. It will damage the SST.
(b) Install the coil spring to the shock absorber.
HINT:
Fit the lower end of the coil spring into the gap of the spring seat
of the shock absorber.
3. INSTALL SUSPENSION SUPPORT
(a) Install the suspension support to the rod.
(b) Temporarily tighten a new nut.
(c) Turn the suspension support so that one of the bolts on
the suspension support faces the same direction, as
shown in the illustration.
HINT:
Align the bolt so that a line drawn between the rod and the bolt
would be 90° to the direction of the lower bushing.
(d) Remove the SST.
SST 09727-30021
HINT:
After removing the SST, again check the direction of the sus-
pension support.