BE0DT-01
N09536
Adjusting Screw AAdjusting Screw B
Adjusting Nut C
N08860
Bubble
Acceptable
range
N08861
Acceptable
range BE-20
- BODY ELECTRICALHEADLIGHT AND TAILLIGHT SYSTEM
1998 Author: Date:
1997 SUPRA (RM502U)
ADJUSTMENT
1. Adjusting headlight aim only:
INSPECT HEADLIGHT AIM
Do the following before inspection.
Make sure the body around the headlight is not de-
formed.
Park the vehicle on a level spot.
The driver gets into the driver's seat and puts the
vehicle in a state ready for driving (with a full tank).
Bounce the vehicle several times.
2. Adjusting headlight aim only:
ADJUST HEADLIGHT VERTICAL ALIGNMENT
If the bubble is outside the acceptable range of the beam angle
gauge, adjust it using adjusting screw A.
3. Adjusting headlight aim only:
ADJUST HEADLIGHT HORIZONTAL ALIGNMENT
If the º0º moves away from the mark beyond the acceptable
range, adjust the º0º back to the mark using adjusting screw B.
N08860
Bubble
Acceptable
range
N09725
Unlock
Lock
Range Acceptable
- BODY ELECTRICALHEADLIGHT AND TAILLIGHT SYSTEM
BE-21
1999 Author: Date:
1997 SUPRA (RM502U)
4. Replacing headlight:
REPLACE HEADLIGHT
5. Replacing headlight:
INSPECT HEADLIGHT AIM
Do the following before inspection.
Make sure the body around the headlight is not de-
formed.
Park the vehicle on a level spot.
The driver gets into the driver's seat and puts the
vehicle in a state ready for driving (with a full tank).
Bounce the vehicle several times.
6. Replacing headlight:
ADJUST HEADLIGHT IN VERTICAL ALIGNMENT
(a) Using adjusting screw A, adjust the headlight aim to within
the specifications.
(b) Make sure the gauge bubble is within the acceptable
range.
HINT:
If the gauge bubble is outside the acceptable range, check that
the vehicle is parked on a level spot.
Readjust the headlight aim after parking the vehicle on a level
spot.
7. Replacing headlight:
ADJUST HEADLIGHT IN HORIZONTAL ALIGNMENT
(a) Using adjusting screw B, adjust the headlight aim to within
the specifications.
(b) Using adjusting nut C, adjust the º0º back to the mark.
HINT:
For adjustment, pull nut C to the rear vehicle to free it. After ad-
justment, check that the nut C is locked in.
