Page 1217 of 2057
Rear Stabilizer Bar(15 752 0)
General EquipmentHydraulic Press
Removal
1. On booth sides.
Refer to: Rear Stabilizer Bar Link (204-02 Rear
Suspension, Removal and Installation).
2.
E67812
x4
3. NOTE: Note the position of each component
before removal.
E68087
Installation
1. NOTE: Make sure that the component is clean,
free of foreign material and lubricant.
NOTE: Make sure that these components are
installed to the noted removal position.
E67369
2. NOTE: Make sure that the clamp is installed to
the same orientation as when removed.
On both sides.
G1000227en2008.50 Kuga8/2011
204-02- 15
Rear Suspension
204-02- 15
REMOVAL AND INSTALLATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 1218 of 2057
E89914
3.On both sides.
General Equipment: Hydraulic Press
E69763
4.Torque: 48Nm
E67812
x4
5.On booth sides.
Refer to: Rear Stabilizer Bar Link (204-02 Rear
Suspension, Removal and Installation).
G1000227en2008.50 Kuga8/2011
204-02- 16
Rear Suspension
204-02- 16
REMOVAL AND INSTALLATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 1219 of 2057
Rear Stabilizer Bar Link
Removal
NOTE:Removal steps in this procedure may
contain installation details.
1. Refer to: Wheel and Tire (204-04 Wheels and
Tires, Removal and Installation).
2. CAUTION: Make sure that the ball joint ball does not rotate.
1. Torque: 70Nm
2. Torque: 15Nm
E67817
2
1
Installation
1.To install, reverse the removal procedure.
G1058286en2008.50 Kuga8/2011
204-02- 17
Rear Suspension
204-02- 17
REMOVAL AND INSTALLATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 1220 of 2057
Rear Stabilizer Bar Bushing
Removal
1.Refer to: Rear Stabilizer Bar (204-02 Rear
Suspension, Removal and Installation).
Installation
1.
G1000228en2008.50 Kuga8/2011
204-02- 18
Rear Suspension
204-02- 18
REMOVAL AND INSTALLATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 1221 of 2057
Wheel Knuckle — LHD FWD/RHD FWD
Removal
1.Refer to: Spring(204-02 Rear Suspension,
Removal and Installation).
2. Refer to: Wheel Bearing and Wheel Hub (204-02
Rear Suspension, Removal and Installation).
3.
E101643
4.
E99208
5.
E93214
6.
E93206
Installation
1. Fabricate a spacer.
E69209
226
40
2. Torque: 120Nm1.
2.NOTE: Only tighten the bolt finger tight at
this stage.
E932621
2
G1000235en2008.50 Kuga8/2011
204-02- 19
Rear Suspension
204-02- 19
REMOVAL AND INSTALLATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 1222 of 2057
3.Install the spacer. Make sure that the spacer is
in a vertical plane and raise the suspension to the design height setting.
1
2
E93313
4.
Torque: 115Nm
E94368
5.Torque: 115Nm
E93214
G1000235en2008.50 Kuga8/2011
204-02- 20
Rear Suspension
204-02- 20
REMOVAL AND INSTALLATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 1223 of 2057
6.
E99208
7.Torque: 115Nm
E101643
8.Refer to: Wheel Bearing and Wheel Hub (204-02
Rear Suspension, Removal and Installation).
9. Refer to: Spring(204-02 Rear Suspension,
Removal and Installation).
G1000235en2008.50 Kuga8/2011
204-02- 21
Rear Suspension
204-02- 21
REMOVAL AND INSTALLATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 1224 of 2057
Wheel Knuckle — LHD 4WD/RHD 4WD
Removal
1.Refer to: Spring(204-02 Rear Suspension,
Removal and Installation).
2. Refer to: Wheel Bearing and Wheel Hub (204-02
Rear Suspension, Removal and Installation).
3.
E101643
4.
E99208
5.
E93214
6.
E93206
Installation
1. Fabricate a spacer.
E69209
226
40
2. Torque: 120Nm1.
2.NOTE: Only tighten the bolt finger tight at
this stage.
E932621
2
G1000760en2008.50 Kuga8/2011
204-02- 22
Rear Suspension
204-02- 22
REMOVAL AND INSTALLATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL