2010 INFINITI QX56 Factory Service Manual

Page 49 of 4210

INFINITI QX56 2010  Factory Service Manual B2115 SEAT LIFTER RRADP-35
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
B2115 SEAT LIFTER RR
DescriptionINFOID:0000000005147459
• The  lifting motor (rear) is installed to the power seat

Page 50 of 4210

INFINITI QX56 2010  Factory Service Manual ADP-36
< COMPONENT DIAGNOSIS >
B2117 ADJ PEDAL MOTOR
B2117 ADJ PEDAL MOTOR
DescriptionINFOID:0000000005147462
• The pedal adjusting motor is installed to the pedal assembly. 
• The pedal adjusting

Page 51 of 4210

INFINITI QX56 2010  Factory Service Manual B2117 ADJ PEDAL MOTORADP-37
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
NO >> GO TO 3
3. CHECK PEDAL ADJUSTING MOTOR CIRCUIT HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect

Page 52 of 4210

INFINITI QX56 2010  Factory Service Manual ADP-38
< COMPONENT DIAGNOSIS >
B2118 TILT SENSOR
B2118 TILT SENSOR
DescriptionINFOID:0000000005147465
• The tilt sensor is installed to the steering column assembly.
• The resistance of tilt senso

Page 53 of 4210

INFINITI QX56 2010  Factory Service Manual B2118 TILT SENSORADP-39
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
1. Turn ignition switch OFF.
2. Check voltage between automatic  drive positioner connector
and ground.
Is the inspecti

Page 54 of 4210

INFINITI QX56 2010  Factory Service Manual ADP-40
< COMPONENT DIAGNOSIS >
B2120 ADJ PEDAL SENSOR
B2120 ADJ PEDAL SENSOR
DescriptionINFOID:0000000005147468
• The pedal adjusting sensor is installed in the pedal assembly.
• The resistance of

Page 55 of 4210

INFINITI QX56 2010  Factory Service Manual B2120 ADJ PEDAL SENSORADP-41
< COMPONENT DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
1. Disconnect automatic drive positioner control unit and pedal adjusting motor assembly. 
2. Check continuity bet

Page 56 of 4210

INFINITI QX56 2010  Factory Service Manual ADP-42
< COMPONENT DIAGNOSIS >
B2126 DETENT SW
B2126 DETENT SW
DescriptionINFOID:0000000005147471
• Park position switch is installed on A/T shift selector. It is turned OFF when the A/T selector le