Page 585 of 4083
BRC-118
< REMOVAL AND INSTALLATION >[VDC/TCS/ABS]
STEERING ANGLE SENSOR
STEERING ANGLE SENSOR
Removal and InstallationINFOID:0000000001836943
REMOVAL
1. Remove spiral cable. Refer to
SR-7, "Removal and Installation".
2. Remove the screws and remove the steering angle sensor.
CAUTION:
In the case that the ABS actuator and electronic unit (control unit) is replaced, make sure to adjust
position of steering angle sensor. Refer to BRC-8, "
ADJUSTMENT OF STEERING ANGLE SENSOR
NEUTRAL POSITION : Special Repair Requirement".
INSTALLATION
1. Installation is in the reverse order of removal.
Revision: March 2010 2008 QX56
Page 586 of 4083
G SENSORBRC-119
< REMOVAL AND INSTALLATION > [VDC/TCS/ABS]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
G SENSOR
Removal and InstallationINFOID:0000000001604552
REMOVAL
1. Remove center console. Refer to IP-20, "Removal and Installa-
tion".
2. Remove yaw rate/side/decel G sensor attaching nuts. CAUTION:
• Do not use power tools to re move or install yaw rate/side/
decel G sensor.
• Do not drop or strike the yaw rate/side/decel G sensor.
3. Disconnect harness connector and remove the yaw rate/side/ decel G sensor.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not drop or strike the yaw rate/side/decel G sensor.
• After installation, calibrate the yaw rate/side/decel G sensor. Refer to BRC-9, "
CALIBRATION OF
DECEL G SENSOR : Special Repair Requirement".
WFIA0202E
Revision: March 2010 2008 QX56
Page 587 of 4083

BRM-1
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY
C
DE
F
G H
I
J
L
M
SECTION BRM
A
B
BRM
N
O P
CONTENTS
BODY REPAIR
SERVICE INFORMATION .. ..........................2
BODY REPAIR ....................................................2
Body Mounting .................................................... ......2
Body Exterior Paint Color ..........................................3
Body Component Parts .............................................4
Corrosion Protection .................................................9
Body Sealing ....................................................... ....12
Body Construction ...................................................16
Body Alignment .......................................................16
Handling Precaution for Plastics ..............................31
Precaution in Repairing High Strength Steel ...........34
Foam Repair ............................................................36
Replacement Operation ...........................................37
Revision: March 2010 2008 QX56
Page 588 of 4083
BRM-2
< SERVICE INFORMATION >
BODY REPAIR
SERVICE INFORMATION
BODY REPAIR
Body MountingINFOID:0000000003243373
When removing, be sure to replace bolts and nuts (sealant applied bolts or self-lock nuts are used for all
mounting).
LIIA1564E
Revision: March 20102008 QX56
Page 589 of 4083

BODY REPAIRBRM-3
< SERVICE INFORMATION >
C
DE
F
G H
I
J
L
M A
B
BRM
N
O P
Body Exterior Paint ColorINFOID:0000000001609797
M: Metallic; 2S: 2-Coat Solid, 2P: 2-Coat Pearl; 3P: 3-Coat Pearl; t: Primerless Diamond Coat Clear
LIIA1437E
Component Color code B30 K32 G10 K11 K12 Q11
Description
Lake-
shore
Slate Serengeti
Sand Liquid
Onyx Silver
Graphite Silver
Indulgence Tuscan
Pearl
Typ e m m m m mm
Clear coat t tt t tt
1 Outside
mirror Body
Chromium
plate Cr2P Cr2P Cr2P Cr2P Cr2P Cr2P
Base Black KH3 KH3 KH3 KH3 KH3 KH3
2 Radiator grille Center and
emblemChromium
plate
Cr2P Cr2P Cr2P Cr2P Cr2P Cr2P
3 Bumpers Fascias Body color B30 K32 G10 K11 K12 Q11
4 Valance BlackKH3 KH3 KH3 KH3 KH3 KH3
5 Running
Boards Body
Body color B30 K32 G10 K11 K12 Q11
Step pad Black KH3 KH3 KH3 KH3 KH3 KH3
6 Outside han-
dles Front
Chromium
plate
Cr2P Cr2P Cr2P Cr2P Cr2P Cr2P
Rear Body color B30 K32 G10 K11 BK12 BQ10
7 Side Guard
Molding Base
Body color B30 K32 G10 K11 BK12 BQ10
To p T r i m Chromium
plate Cr2P Cr2P Cr2P Cr2P Cr2P Cr2P
8 License plate
finisher Base
Body color B30 K32 G10 K11 K12 Q11
Top and bot-
tom trim Chromium
plate
Cr2P Cr2P Cr2P Cr2P Cr2P Cr2P
9 Cowl top cover Body color B30 K32 G10 K11 K12 Q11
10 Rear spoiler Body color B30 K32 G10 K11 K12 Q11
Revision: March 2010 2008 QX56
Page 590 of 4083
BRM-4
< SERVICE INFORMATION >
BODY REPAIR
Body Component Parts
INFOID:0000000001609798
UNDERBODY COMPONENT PARTS
1. Hoodledge assembly (RH, LH)
2. Hoodledge reinforcement (RH, LH)
3. Body mounting bracket (RH, LH)
4. Hoodledge front brace (RH), Battery mounting bracket (LH)
LIIA0908E
Revision: March 2010 2008 QX56
Page 591 of 4083
BODY REPAIRBRM-5
< SERVICE INFORMATION >
C
DE
F
G H
I
J
L
M A
B
BRM
N
O P
5. Harness connector bracket
6. Rear floor reinforcement
7. Rear floor
8. Rear floor reinforcement
9. Rear floor side (RH, LH)
10. Crossmember
11. Second seat rear crossmember
12. Second seat front crossmember
13. Rear front seat crossmember
14. Second Body crossmember
15. Front floor
16. Front seat front crossmember
17. Front floor reinforcement
18. Outer sill (RH, LH)
19. Second crossmember extension
20. Rear crossmember end
21. Rear lower crossmember end
22. Rear crossmember end (RH, LH)
23. Rear side member rear reinforcement (RH, LH)
24. Rear side member (RH, LH)
25. Rear side member reinforcement (RH, LH)
26. Inner sill extension (RH, LH)
27. Rear crossmember
28. Upper dash top
29. Upper dash bottom
30. Cowl top
31. Lower dash
32. Lower dash insulator (RH)
33. Lower dash reinforcement
34. Side dash (RH, LH)
35. Lower dash insulator
Revision: March 2010 2008 QX56
Page 592 of 4083
BRM-6
< SERVICE INFORMATION >
BODY REPAIR
BODY COMPONENT PARTS
1. Front fender (RH, LH)
2. Hood assembly
3. Rear hoodledge reinforcement (RH, LH)
4. Outer sill reinforcement (RH, LH)
LIIA1438E
Revision: March 20102008 QX56