Page 2441 of 2492
UPPER REAR STRUCTURE
End panel
44P
44-15
644J1-17995
CAB11539R7A
CAE11546-2R8
CAE11546-2R8
J
Page 2442 of 2492
UPPER REAR STRUCTURE
End panel
44PEnd panel
644J5-17993
CAI11550R5
CAS13033R1
44-16
J
Page 2443 of 2492
UPPER REAR STRUCTURE
End panel
44P
44-17
2 - Complete
REMINDER 1: it is necessary to remove the light
support reinforcement on the Parts Department part
(side opposite impact).
644J6-17992
CAN11689R5
CAA11536R3
TOC14609-1R4
J
Page 2444 of 2492
UPPER REAR STRUCTURE
End panel
44P
44-18
REMINDER 2: it is necessary to fold the metal panel of
the upper section of the end panel and the rear end
cross member to ease insertion when fitting.
644J7-17994-1
18015R1
18014R1
J
Page 2445 of 2492
UPPER REAR STRUCTURE
End panel
44S
44-19
REMINDER 3: in the event of complete replacement
where the left hand light support remains in place (for
example, in case of a right hand side impact), it is not
necessary to remove the lower hinge reinforcement
completely. It is sufficient to grind the welding bead to
the upper section of the end panel (see section H').
644J8-17998-2
TOI18020-4R1
J
Page 2446 of 2492
UPPER REAR STRUCTURE
Lower hinge reinforcement
44SLower hinge reinforcement
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of the left hand light
support and the end panel for a rear impact.
The rear face jig Car. 1563 (Parts Department
part no. 00 00 156 300) must be used.
In the operation described below, only descriptions of
the joints specific to the part concerned are given.
The information on the additional parts will be dealt
with in their appropriate chapters (see contents).
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part delivered alone.
PARTS CONCERNED (thickness in mm):
PRF4421
1Lower hinge reinforcement
2Light support reinforcement,
3End panel upper cross member
4Rear end cross member
5Tail wheel arch
6Light support3
1
1
0.8
1.2
1
44-20
K
Page 2447 of 2492
UPPER REAR STRUCTURE
Lower hinge mounting reinforcement
44PLower hinge mounting reinforcement
644K1-17998-1
TOI18020-2R1
TOA15608-1R3
TOA15608-1R2
44-21
K
Page 2448 of 2492
UPPER REAR STRUCTURE
Lower hinge mounting reinforcement
44S
44-22
TOA15608-1R5
TOI18020-2R1
K