Page 1921 of 2492
GENERAL
Opening clearances
40
15344R
1
15348R
15342R15345R
23
4
40-8
Page 1922 of 2492
GENERAL
Opening clearances
40
15346R
5
15343R
15347R
67
40-9
Page 1923 of 2492
LOWER STRUCTURE
Absorber support mounting
INTRODUCTION
Basic operation for a rear impact.
This part is mounted by three M8 nuts on the rear
end panel.
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Single part.
251a01-15362
41A
PRE4105
41-1
Page 1924 of 2492
LOWER STRUCTURE
Rear floor base
This part may be replaced in two ways:
Acompletely, as a complementary operation to
the rear end cross member.
Bby part section, as a complementary operation
to the rear end pillar lower reinforcement.
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page).
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Single part.
PRE4106
41B
or
PARTS CONCERNED (thickness in mm) :
1Rear floor base 0.8
2Rear end cross member 0.8
3Rear end pillar lower reinforcement 1
4Rear floor 0.7
5Body side lining 0.7
6Rear inner wheel arch 0.8
7Rear floor base side side-member 1
8Rear floor base intermediate stiffener 0.8
9Rear floor base front stiffener 0.8
41-2
Page 1925 of 2492
LOWER STRUCTURE
Rear floor base
251b01-15363
41B
A
CAS13033R1
11
C
CAA11538R3b
31
B
CAR11700R6
21
D
CAA11536-4R1
1 4
E
CAF11547-2R4
1
3 5
41-3
Page 1926 of 2492
LOWER STRUCTURE
Rear floor base
41B
F
CAA11538R3a
1
5
G
CAA11538R4
1
6
H
CAA11538-1R6
1
8
I
CAW13605-4R2
11
8
J
CAA11536-3R5
11
K
CAS13028R4
11
9
41-4
Page 1927 of 2492
LOWER STRUCTURE
Rear floor base support
PRE4107
41C
INTRODUCTION
The replacement of this part is a complementary
operation to the rear floor base.
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page).
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Part assembled with:
- rear floor base side side-member,
- rear floor base intermediate stiffener,
- rear floor base front stiffener.
PARTS CONCERNED (thickness in mm) :
1Rear floor base side side-member 1
2Rear floor base intermediate stiffener 0.8
3Rear floor base front stiffener 0.8
4Rear floor 0.7
5Rear side member 1.2
41-5
Page 1928 of 2492
LOWER STRUCTURE
Rear floor base support
251c01-15364
41C
A
CAT13327R3
1
4
5
B
TOI14637-4R5
1
2 4
C
CAA11538R5
1 3
41-6