Page 9 of 2492
LIFTING
Vehicle lifts
02
SAFETY INSTRUCTIONS
Several scenarios should be considered:
1 - WHEN REMOVING COMPONENTS
In general, never use a 2 post lift, if a four post lift
can be used.
If this is not possible, position the lifting pads
under the body sill, level with the vehicle’s jacking
points.2 - SPECIAL CASE - REMOVING AND REFITTING
THE ENGINE AND TRANSMISSION ASSEMBLY
In this special case, the body of the vehicle must
be firmly attached to the arms of the two post lift
using the special pads.
FOG
Reference FOG 449 8111 - 449 8411
or
CHEMICO
Reference 39 2550 0001
or
SCHENCH
Reference 776 684
98703S
FRONT
98704S
REAR
These must be positioned in line with the vehicle’s
jacking points. They must be clipped into the
holes in the body sill.
02-2
Page 10 of 2492
TOWING
All types
FRONT
03
OBSERVE THE LEGAL TOWING REQUIREMENTS OF THE COUNTRY YOU ARE IN.
NEVER USE THE DRIVESHAFTS FOR TOWING THE VEHICLE.
The towing points may only be used for towing the vehicle on the road. They should never be used for remo-
ving the vehicle from a ditch or for any other similar breakdown operation or to lift the vehicle, either direct-
ly or indirectly.
98705S
REAR
98702S
03-1
Page 11 of 2492
DESCRIPTIONPACKAGINGPART NUMBER
1 kg tin
100 g tube
80 ml tube
180 g sachet
Aerosol77 01 421 145
77 01 028 179
77 01 422 307
77 01 366 100
77 01 422 308
LUBRICANTS
LUBRICANTS - CONSUMABLES
Packaging
04
•MOLYKOTE "BR2"
for main bearing journal faces, thrust pad
guide tubes, clutch fork pads, lower suspension
arm bearings, torsion bar splines, steering box,
driveshaft splines.
•
MOLYKOTE "33 Medium"
tubular rear axle rings
anti-roll bar rings.
•
ANTI-SEIZE
(high temperature grease) Turbo etc.
•
"MOBIL CVJ" 825 Black star
or MOBIL EXF57C
for driveshaft joints
•
MULTIPURPOSE LUBRICANT
wheel sensor
• Perfect-seal "LOWAC"
coating fluid for seals.
• Mastic
for sealing exhaust pipe unions.
•
HARDENER KIT
("CAF 4/60 THIXO")
for sealing sides of bearing caps.
• AUTO joint blue
sealing paste.
100 g tube
1.5 kg tin
Kit
100 g tube
45 g tube77 01 417 404
77 01 421 161
77 01 421 080
77 01 396 227
77 01 397 027
MECHANICAL SEALANTS
04-1
Page 12 of 2492

DESCRIPTIONPACKAGINGPART NUMBER
24 cc bottle
24 cc bottle
24 cc bottle
50 cc bottle77 01 394 070
77 01 394 071
77 01 394 072
77 01 400 309
ADHESIVES
LUBRICANTS - CONSUMABLES
Packaging
04
•"LOCTITE - FRENETANCH"
stops bolts coming loose and allows them to be
undone.
•
"LOCTITE - FRENBLOC"
locks bolts.
•
"LOCTITE SCELBLOC"
for bonding bearings.
•
"LOCTITE AUTOFORM"
for bonding the flywheel to the crankshaft.
CLEANING AGENTS - LUBRICANTS
150 g aerosol
Aerosol
250 ml can
300 ml aerosol
355 ml can
500 ml aerosol
Aerosol
400 ml aerosol77 01 408 464
77 01 422 379
77 01 393 112
77 01 393 111
77 01 423 189
77 01 408 466
77 01 405 952
77 01 421 282•"NETELEC"
unseizes, lubricates.
• NC1 cleaner
electrical contact cleaner
• Carburettor cleaner
• Injector cleaner
•Super concentrated unseizing agent
•
"DECAPJOINT " (FRAMET) for cleaning the
gasket faces of aluminium cylinder heads
• Brake cleaner
MECHANICAL SEALANTS
• AUTO joint grey
sealing paste.
•
LOCTITE 518
for sealing the gearbox housing.
• Leak detector
100 g tube
24 ml syringe
Aerosol77 01 422 750
77 01 421 162
77 11 143 071
04-2
Page 13 of 2492
DESCRIPTIONPACKAGINGPART NUMBER
LUBRICANTS - CONSUMABLES
Packaging
04
•"CIRCUIT PLUS"
varnish for repairing heated screens
•
"CONTACT PLUS"
varnish for repairing rear screen supply termi-
nals
Bottle
Kit77 01 421 135
77 01 422 752
VARNISHES
BRAKES
• Brake fluid 0.5 litre bottleDOT 477 01 421 940
04-3
Page 14 of 2492
DRAINING, RE-FILLING
Engine
E7J - K7M ENGINE
05
F3R - F8Q ENGINES
98486R
TOOLING REQUIRED
Engine drain plug spanner
DRAINING: plug(1)
98701R
FILLING: plug(2)
F3R ENGINE F8Q ENGINE
98487R
98489R
05-1
Page 15 of 2492
DRAINING, RE-FILLING
Engine
05
FILLING: plug(2)
E7J ENGINE K7M ENGINE
98700R
98437R
05-2
Page 16 of 2492
DRAINING, RE-FILLING
Gearbox
05
DRAINING: plug(1)
F3R - F8Q ENGINE FILLING
: plug(2)
98486R1
E7J - K7M ENGINE
98701R1
05-3