Page 1929 of 2492
LOWER STRUCTURE
Rear floor base front stiffener
PRE4108
41D
INTRODUCTION
The replacement of this part is a complementary
operation to the rear floor base support.
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page).
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Single part.
PARTS CONCERNED (thickness in mm) :
1Rear floor base front stiffener 0.8
2Rear floor 0.7
251d01-15364-1
A
CAA11538R1
1
2
41-7
Page 1930 of 2492
LOWER STRUCTURE
Rear end pillar lower reinforcement
PRE4109
41E
INTRODUCTION
The replacement of this part is a complementary
operation to the rear end cross member.
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page).
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Part assembled with welded nuts.
PARTS CONCERNED (thickness in mm) :
1Rear end pillar lower reinforcement 1
2Rear end cross member 0.8
3Body side lining 0.7
4Rear end pillar lining 1
5Rear floor 0.7
6Rear side member 1.2
7Lights mounting 0.7
8Rear end pillar lining 1
41-8
Page 1931 of 2492
LOWER STRUCTURE
Rear end pillar lower reinforcement
251e01-15365
41E
A
CAA11537R4
1
2
B
CAN11689R4
1 7
C
CAD11545R4
17 8
D
CAA11536-2R7
1 8
E
CAA11536R7
1
3
41-9
Page 1932 of 2492
LOWER STRUCTURE
Rear end pillar lower reinforcement
251e02-15366
41E
F
CAA11537R2
1
2
G
CAA11538-1R7
1 6
H
CAA11538-1R7
1 5
41-10
Page 1933 of 2492
LOWER STRUCTURE
Rear end cross member assembly
PRE4110
41F
INTRODUCTION
The replacement of this part is a complementary
operation to the rear end panel.
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page).
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Part assembled with:
- striker plate reinforcement,
- central reinforcement.
PARTS CONCERNED (thickness in mm) :
1Rear end cross member 0.8
2Rear end pillar lower reinforcement 1
3Rear floor base 0.8
4Rear floor 0.7
5Tailgate striker plate central
reinforcement 1.2
6Rear floor central reinforcement 0.8
41-11
Page 1934 of 2492
LOWER STRUCTURE
Rear end cross member assembly
251f01-15367
41F
A
CAN11689R5
14
B
CAA11538-1R8
1
4
C
CAS13024-4R5
156
D
CAA11537-1R1a
1
2
E
CAA11536-1R2
6 1
41-12
Page 1935 of 2492
LOWER STRUCTURE
Rear end cross member assembly
251f02-15363-1
41F
F
CAR11700-1R4
13
G
CAA11537-1R5
1
2
41-13
Page 1936 of 2492
LOWER STRUCTURE
Rear floor unit
PRE4111
41G
INTRODUCTION
The replacement of this part is identical to the me-
thod described in the basic manual (M.R. 313 -
Section 41). Only the joints at the rear end pillar
lower reinforcements are different, which are des-
cribed in this document (section 41-E).
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page).
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Part assembled with:
- side member assemblies,
- floor assembly,
- cross member under the floor,
- floor base assembly,
- rear end cross member assembly,
- rear end pillar reinforcement.
41-14