AUTOMATIC TRANSMISSION
Wiring
23
Removing the wiring assembly is specific to the
AD4 A4.2.
REMOVAL
Put the vehicle on a two post lift.
Disconnect the battery.
Remove the front left hand wheel.
From the wheel arch:
Remove:
- the earth wire from the multifunction sensor,
- the multifunction sensor mounting bolt (A).
On the vehicle:
- position the lifting plate (tool made locally as
described on the next page).
99586R1
99182S
99613S
98750R1
Remove the engine torque traction link on the
gearbox side.
Remove the speed sensor (mounting bolt (B)).
Remove gear selector control ball joint (C).
Remove all the wiring assembly, taking note of its
position and mountings so that is refitted
correctly.
Disconnect the 52 track connector and the
connector in the inter engine unit. Fit the engine support tool with the support
bracket on the left hand side.
23-25
