EXTERIOR PROTECTION
Front wing extender
55P
55-6
REMOVAL
After removing the front valance protector
(section 55-B),
Remove mounting screws (A).
Protect the wing using masking tape and then release
the extender using the special pliers.
Disconnect the side repeater.Remove the mounting bolts (B).
Remove:
– the front section of the mudguard,
– the mounting bolt (C).
Disconnect the connector (D) from the fog light wiring
harness.
17598R
17595R1
17599R
C
EXTERIOR PROTECTION
Front bumper (central section)
55P
55-11
PARTIAL REMOVAL INCLUDING THE CENTRAL
BUMPER AND THE EXTENDER
After removing the bumper protector
(section 55-A),
remove mounting bolts (C) and (D).
Protect the wing using masking tape and then, release
the extender using the unclipping pliers.
Disconnect the side repeater.Remove:
– the front section of the mudguard,
– the mounting bolt (E),
Disconnect the connector (F) from the fog light wiring
harness.
Remove the central mounting bolts (G).
Partially release the wing extender unit with the
bumper.
17598R1
17599R116882R1
E
