Page 2489 of 2492
EXTERIOR ACCESSORIES
Rack embellishers
56SRack embellishers
PRF5607
56-4
C
Page 2490 of 2492
EXTERIOR ACCESSORIES
Rack embellishers
56S
56-5
REPLACEMENT
Use one of the window bonding kits to assemble this
part.
Level down the residual seals, degrease using
heptane then apply red primer to both sections. Apply
glue to (A).
Refit and insert the spacer (B), the embellisher and the
mounting bolt (C). To pad the casing correcting use
masking tape.
18173R
C
Page 2491 of 2492
NON-SIDE OPENING ELEMENTS TRIM
Luggage compartment lid trim
73
173 NON-SIDE OPENING ELEMENTS TRIM
Luggage compartment lid trim
REMOVING THE CENTRAL TRIM
Remove the protective sheath and disconnect the
connector (A).Loosen the wing nut (B).
Remove:
– the emergency spare wheel protector,
– the mounting bolts (C).
Remove the trim using unclipping pliers (nine clips).
16782R
16784R
16783R
73-1
A
Page 2492 of 2492
NON-SIDE OPENING ELEMENTS TRIM
Luggage compartment lid trim
73
73-2
REMOVING THE LOCK COVER
Remove the two mounting bolts (D).
Release the cover.
REFITTING
After checking that the locks operate correctly,
proceed in the reverse order to removal.
16830R
A